Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 week ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
24-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
24 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
ECCN Code |
EAR99 |
Resistance |
11.5Ohm |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
2.8mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
8 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG1414 |
Pin Count |
24 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
12V |
Polarity |
Non-Inverting |
Number of Channels |
1 |
Interface |
Parallel |
Max Supply Voltage |
16.5V |
Min Supply Voltage |
4.5V |
Test Frequency |
1MHz |
Operating Supply Current |
1nA |
Power Dissipation |
2.8mW |
Max Supply Current |
1μA |
Throw Configuration |
SPST |
Turn On Delay Time |
93 ns |
Number of Inputs |
8 |
Supply Type |
Dual, Single |
Bandwidth |
256MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Turn-Off Delay Time |
35 ns |
Max Dual Supply Voltage |
16.5V |
On-State Resistance (Max) |
11.5Ohm |
Min Dual Supply Voltage |
4.5V |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
70 dB |
Neg Supply Voltage-Max (Vsup) |
-5.5V |
Current - Leakage (IS(off)) (Max) |
150pA |
Channel Capacitance (CS(off), CD(off)) |
8pF |
On-state Resistance Match-Nom |
0.6Ohm |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
93ns, 35ns |
Insertion Loss (dB) |
0.55 dB |
Charge Injection |
10pC |
Channel-to-Channel Matching (ΔRon) |
550m Ω |
Crosstalk |
-75dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
320ns |
Switch-off Time-Max |
70ns |
Normal Position |
NO |
Voltage - Supply, Dual (V±) |
±4.5V~16.5V |
Height Seated (Max) |
1.2mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG1414BRUZ-REEL7 Overview
The electrical component comes in 24-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. High reliability is ensured by the advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operation at a temperature around -40°C~125°C TA. 24 terminations have been made so far. Due to its 1 channels, the electrical component produces high-quality output. When a voltage supply of 5V is used, the electronic component should be turned on and run. The electrical component body receives 24 pins. These analog multiplexers are built based on SPST - NO switching circuits. Try searching for ADG1414 variants of the analog switch ic. It has an internal resistance of 11.5Ohm. To find out what the functions of 24 pins are, please refer to their datasheets. Multiplexer or Switches is a typical switch device. A voltage higher than 16.5V should not normally be supplied to the switches. A analog switch ic that has a cost-effective Dual, Single supply type. A low voltage of 4.5V should be applied to the electronic component. This digital switch can be operated with a current of 1nA. The analogue multiplexer may be damaged if voltage is greater than 1μA. For this switch, a dual supply voltage is feasible, but it must not exceed 16.5VFor dual power supplies, a voltage of at least 4.5V should be attached. The electronic component can function from 12V. A 8 input needs to be operated. The data can be transferred over a wide range of bandwidths, called 256MHz bandwidths.
ADG1414BRUZ-REEL7 Features
1 Channels
Switch Circuit: SPST - NO
1nA Supply Current
Bandwidth: 256MHz
ADG1414BRUZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG1414BRUZ-REEL7 Analog Switches & Multiplexers ICs applications.
- High-Voltage
- High reliability control systems
- Remote wireless modules
- Public switching systems
- Imaging
- E1 Multiplexer
- Microprocessor Controlled Analog Systems
- Relay Replacement
- PDH Multiplexers
- Automatic test equipment