banner_page

ADG1419BRMZ

110ns, 140ns SPDT 2.4Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG1419 8 Pins 500pA 15V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-ADG1419BRMZ
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 301
  • Description: 110ns, 140ns SPDT 2.4Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG1419 8 Pins 500pA 15V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Details

Tags

Parameters
Supply Voltage 15V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number ADG1419
Pin Count 8
Number of Outputs 2
Operating Supply Voltage 12V
Polarity Non-Inverting
Number of Channels 1
Interface Parallel
Max Supply Voltage 16.5V
Min Supply Voltage 5V
Test Frequency 1MHz
Power Dissipation 2mW
Max Supply Current 120μA
Turn On Delay Time 85 ns
Number of Inputs 1
Voltage - Supply, Single/Dual (±) 5V~16.5V ±4.5V~16.5V
Bandwidth 135MHz
Neg Supply Voltage-Nom (Vsup) -15V
Turn-Off Delay Time 115 ns
Max Dual Supply Voltage 16.5V
On-State Resistance (Max) 2.4Ohm
Min Dual Supply Voltage 4.5V
Dual Supply Voltage 15V
Multiplexer/Demultiplexer Circuit 2:1
Off-state Isolation-Nom 64 dB
Current - Leakage (IS(off)) (Max) 500pA
Channel Capacitance (CS(off), CD(off)) 19pF 44pF
On-state Resistance Match-Nom 0.05Ohm
Switch Circuit SPDT
Switch Time (Ton, Toff) (Max) 110ns, 140ns
Insertion Loss (dB) 0.16 dB
Charge Injection -16pC
Channel-to-Channel Matching (ΔRon) 50m Ω
Crosstalk -64dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Height 1.1mm
Length 3.2mm
Width 3.2mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Contains Lead
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 1 month ago)
Contact Plating Tin
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature -40°C~125°C TA
Packaging Tube
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Resistance 2.4Ohm
Subcategory Multiplexer or Switches
Max Power Dissipation 2mW
Technology BICMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1

ADG1419BRMZ Overview


This electronic part is conveniently packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), making it easy to ship abroad. Advanced packaging method Tube is used to provide high reliability. The multiplexer is located in Surface Mount. 2:1 is the ratio between multiplexers and demultiplexers. Operation at a temperature around -40°C~125°C TA. The total number of terminations is 8. High-quality output is provided by the electronic component's 1 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. There is an electrical component included in the 8 series. A SPDT switching circuit is used for these analog switches. Using the ADG1419 search parameter, you can discover variants of the switch. Analog switches have 2.4Ohm internal resistance. You can find the functions of the 8 pins in the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 16.5V. There should be 5V voltage fed to the electrical part below 5V. The analogue multiplexer may be damaged if voltage is greater than 120μA. Despite this switch's dual supply capability, its voltage should not exceed 16.5V. It is recommended that you attach at least 4.5V to your dual power supply. There is a voltage range of 12V operating voltages for the electrical part. It is possible to operate 1 inputs. The data can be transferred over a wide range of bandwidths, called 135MHz bandwidths. Multiplexer ics with 2 outputs are available.

ADG1419BRMZ Features


1 Channels
Switch Circuit: SPDT
Bandwidth: 135MHz

ADG1419BRMZ Applications


There are a lot of Analog Devices Inc. ADG1419BRMZ Analog Switches & Multiplexers ICs applications.

  • Cable PC
  • E1 Network Equipment
  • Existing multiplexer applications (both fault-protected and nonfault-protected)
  • Mechanical reed relay replacement
  • Imaging
  • Switching Systems
  • ATM
  • DVD-R
  • Frame Relay Equipment
  • Cable Telephony – NIU, Set-Top Box, Home Side Box

Write a review

Note: HTML is not translated!
    Bad           Good