ADG1421BRMZ

145ns, 145ns SPST - NO 2.4Ohm Analog Switches BREAK-BEFORE-MAKE ADG1421 10 Pins 500pA 5V 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1421BRMZ
Package: 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 803
Description: 145ns, 145ns SPST - NO 2.4Ohm Analog Switches BREAK-BEFORE-MAKE ADG1421 10 Pins 500pA 5V 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 3 weeks ago)
Mounting Type	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	10
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Resistance	2.4Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	1.8mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG1421
Pin Count	10
Operating Supply Voltage	12V
Number of Channels	1
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Power Dissipation	1.8mW
Max Supply Current	190μA
Turn On Delay Time	145 ns
Number of Inputs	2
Voltage - Supply, Single/Dual (±)	5V~16.5V ±4.5V~16.5V
Supply Type	Dual, Single
Bandwidth	180MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	145 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	2.4Ohm
Min Dual Supply Voltage	4.5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	18pF 22pF
On-state Resistance Match-Nom	0.04Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	145ns, 145ns
Insertion Loss (dB)	0.12 dB
Charge Injection	-5pC
Channel-to-Channel Matching (ΔRon)	20m Ω
Crosstalk	-74dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	395ns
Normal Position	NO
Signal Current-Max	0.4A
Height	1.1mm
Length	3.1mm
Width	3.1mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1421BRMZ Overview

Presented in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width), this electrical component is convenient for overseas shipping. In order to provide high reliability, an advanced packaging method Tube is used. Multiplexers like this are mounted in the Surface Mount position. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Extended operating temperature around -40°C~125°C TA. The total number of terminations is 10. A high-quality output is provided by the electrical component's 1 channels. A 5V voltage supply should turn on and run the electronic component. A total of 10 pins are injected into the body of the electronic part. Multiplexers built on a SPST - NO switching circuit are built. If you are looking for variants of the digital switch, trying search with ADG1421. An switch multiplexer with 2.4Ohm internal resistance has a value of 2.4Ohm. For details about the functions of 10 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. Users should never supply a voltage higher than 16.5V to a switch device. Analog switch ics with Dual, Single supply type are cost-effective. 5V should be the lowest voltage fed to the electronic component. The switch multiplexer may be damaged if it is exposed to voltage greater than 190μA. For this multiplexer, dual supply voltage is feasible, but it should not exceed 16.5V. A dual power supply should have at least 4.5V voltage attached. The electronic component can function from 12V. Operating 2 inputs is required. The transfer of data can be performed over 180MHz bandwidths.