ADG1422BRMZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Supplier Device Package | 10-MSOP |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 2.4Ohm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 1.8mW |
| Base Part Number | ADG1422 |
| Number of Outputs | 2 |
| Operating Supply Voltage | 12V |
| Number of Channels | 2 |
| Interface | Parallel |
| Number of Circuits | 2 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 5V |
| Test Frequency | 1MHz |
| Operating Supply Current | 120μA |
| Power Dissipation | 1.8mW |
| Max Supply Current | 190μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 145 ns |
| Number of Inputs | 2 |
| Voltage - Supply, Single/Dual (±) | 5V~16.5V ±4.5V~16.5V |
| Supply Type | Dual, Single |
| Bandwidth | 180MHz |
| Turn-Off Delay Time | 145 ns |
| Max Dual Supply Voltage | 16.5V |
| -3db Bandwidth | 180MHz |
| On-State Resistance (Max) | 2.4Ohm |
| Min Dual Supply Voltage | 4.5V |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 18pF 22pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 145ns, 145ns |
| Insertion Loss (dB) | 0.12 dB |
| Charge Injection | -5pC |
| Channel-to-Channel Matching (ΔRon) | 20mOhm |
| Crosstalk | -74dB @ 1MHz |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG1422BRMZ-REEL7 Overview
This electronic part is conveniently packaged in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width), making it easy to ship abroad. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, you'll find this switch device. 1:1 is the ratio between multiplexers and demultiplexers. Operating temperature around -40°C~125°C TA extended. By its 2 channels, the electronic component provides high-quality output. A SPST - NC switching circuit is used for these analog switches. A 2 circuit is present in this switch device. Look for analog switch ic variants by searching with ADG1422. Internally, this switch multiplexer has a resistance of 2.4Ohm. The datasheets for the 10 pins explain the functions. It is normally recommended that users do not supply the multiplexer with voltages higher than 16.5V. A analog switch ic that has a cost-effective Dual, Single supply type. 5V should be the lowest voltage fed to the electronic component. It would be sufficient to run this analogue multiplexer with 120μA current. A digital multiplexer may suffer damage if voltage is applied above 190μA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 16.5V. When using dual power supplies, you should attach at least 4.5V. A voltage of 12V can be used to operate the electronic component. Among the inputs that can be operated are the 2 inputs. There are various bandwidths available for data transfer. The switches should not operate in an environment where the temperature is higher than 125°C. This digital multiplexer has 2 outputs. Suppliers are offering a 10-MSOP package.
ADG1422BRMZ-REEL7 Features
2 Channels
Switch Circuit: SPST - NC
120μA Supply Current
-3db Bandwidth: 180MHz
Bandwidth: 180MHz
ADG1422BRMZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG1422BRMZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Channel Banks
- Automotive applications
- Industrial control systems
- Sample-and-hold systems
- SONET
- Cable PC
- Video switching
- Communications systems
- Digital cross connects (DSX-1)
- Digital access cross connects
