ADG1433YCPZ-REEL7

170ns, 75ns SPDT 4.7Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG1433 16 Pins 300pA 5V 16-VQFN Exposed Pad, CSP

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1433YCPZ-REEL7
Package: 16-VQFN Exposed Pad, CSP
Datasheet: PDF
Stock: 217
Description: 170ns, 75ns SPDT 4.7Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG1433 16 Pins 300pA 5V 16-VQFN Exposed Pad, CSP(Kg)

Details

Tags

Parameters
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	70 dB
Current - Leakage (IS(off)) (Max)	300pA
Channel Capacitance (CS(off), CD(off))	12pF 22pF
On-state Resistance Match-Nom	0.55Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	170ns, 75ns
Insertion Loss (dB)	0.24 dB
Charge Injection	-50pC
Channel-to-Channel Matching (ΔRon)	500m Ω
Crosstalk	-70dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	545ns
Switch-off Time-Max	240ns
Height Seated (Max)	1mm
Length	4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Mounting Type	Surface Mount
Package / Case	16-VQFN Exposed Pad, CSP
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	16
ECCN Code	EAR99
Resistance	4.7Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	6.6mW
Technology	CMOS
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	ADG1433
Pin Count	16
Number of Outputs	6
Operating Supply Voltage	12V
Number of Channels	3
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Nominal Supply Current	260μA
Power Dissipation	6.6mW
Max Supply Current	475μA
Turn On Delay Time	170 ns
Number of Inputs	3
Voltage - Supply, Single/Dual (±)	5V~16.5V ±4.5V~16.5V
Supply Type	Dual, Single
Bandwidth	200MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	75 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	4.7Ohm
Min Dual Supply Voltage	4.5V

ADG1433YCPZ-REEL7 Overview

Shipping overseas is convenient due to the electrical component's packing in 16-VQFN Exposed Pad, CSP. High reliability is ensured by the advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. 2:1 is the number of circuits in the multiplexer and demultiplexer. Extended operating temperature around -40°C~125°C TA. Totally, there are 16 terminations. As a result of its 3 channels, this electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 5V voltage supply. A total of 16 pins are injected into the electrical part body. Multiplexers built on a SPDT switching circuit are built. ADG1433 can be used to search for analog multiplexer variants. This digital multiplexer has 4.7Ohm internal resistance. For functions related to 16 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 16.5V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. It is recommended that the electrical component receives a voltage of 5V. If put voltage greater than 475μA on the device, damage may be caused to the analogue multiplexer. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 16.5V. The voltage should be at least 4.5V if you are using dual power supplies. It can operate from 12V operating voltages. Operating 3 inputs is required. It is possible to transfer data over a 200MHz-bandwidth. A analog switch ics with 6 outputs is included.