Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 2 weeks ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
4.7Ohm |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
6.6mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG1433 |
Pin Count |
16 |
Number of Outputs |
6 |
Operating Supply Voltage |
12V |
Polarity |
Non-Inverting |
Number of Channels |
3 |
Interface |
Parallel |
Max Supply Voltage |
16.5V |
Min Supply Voltage |
4.5V |
Test Frequency |
1MHz |
Nominal Supply Current |
260μA |
Power Dissipation |
6.6mW |
Max Supply Current |
475μA |
Turn On Delay Time |
170 ns |
Number of Inputs |
3 |
Voltage - Supply, Single/Dual (±) |
5V~16.5V ±4.5V~16.5V |
Supply Type |
Dual, Single |
Bandwidth |
200MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Turn-Off Delay Time |
75 ns |
Max Dual Supply Voltage |
16.5V |
On-State Resistance (Max) |
4.7Ohm |
Min Dual Supply Voltage |
4.5V |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
70 dB |
Current - Leakage (IS(off)) (Max) |
300pA |
Channel Capacitance (CS(off), CD(off)) |
12pF 22pF |
On-state Resistance Match-Nom |
0.55Ohm |
Switch Circuit |
SPDT |
Switch Time (Ton, Toff) (Max) |
170ns, 75ns |
Insertion Loss (dB) |
0.24 dB |
Charge Injection |
-50pC |
Channel-to-Channel Matching (ΔRon) |
500m Ω |
Crosstalk |
-70dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
545ns |
Switch-off Time-Max |
240ns |
Max Junction Temperature (Tj) |
150°C |
Drain to Source Resistance |
4.7Ohm |
On-State Resistance |
4Ohm |
Height |
1.2mm |
Length |
5mm |
Width |
4.4mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG1433YRUZ Overview
The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. Advanced packaging method Tube is used to provide high reliability. Surface Mount is where this multiplexer is located. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Extended operating temperature around -40°C~125°C TA. 16 terminations have been made so far. Due to its 3 channels, the electrical component produces high-quality output. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. There is an electrical component included in the 16 series. The analog switch ics are built using SPDT switching circuits. Try searching with ADG1433 to find analog multiplexer variants. There is 4.7Ohm internal resistance in this digital multiplexer. For details about the functions of 16 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 16.5V. A cost-effective Dual, Single supply type analogue multiplexer. A low voltage of 4.5V should be applied to the electronic component. A voltage higher than 475μA may cause damage to the switch multiplexer. If put voltage greater than 16.5V on the multiplexer, damage may be caused to the device. It is recommended that you attach at least 4.5V to your dual power supply. Operating voltages of 12V are compatible with the electrical part. The 3 inputs need to be operated in order to work. 200MHz bandwidths enable data to be transferred. Resistivity from Drain to Source is 4.7Ohm for this electronic part. A analog switch ics with 6 outputs is included.
ADG1433YRUZ Features
3 Channels
Switch Circuit: SPDT
Bandwidth: 200MHz
Drain-to-Source resistance: 4.7Ohm
ADG1433YRUZ Applications
There are a lot of Analog Devices Inc. ADG1433YRUZ Analog Switches & Multiplexers ICs applications.
- Intelligent PBX
- DSUs
- Mechanical reed relay replacement
- Battery-powered systems
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Digital access cross connects
- Switching Systems
- Video switching
- Signal routing between systems
- Industrial