ADG1433YRUZ-REEL

170ns, 75ns SPDT 4.7Ohm Analog Switches BREAK-BEFORE-MAKE ADG1433 16 Pins 300pA 5V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1433YRUZ-REEL
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 626
Description: 170ns, 75ns SPDT 4.7Ohm Analog Switches BREAK-BEFORE-MAKE ADG1433 16 Pins 300pA 5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Crosstalk	-70dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	545ns
Switch-off Time-Max	240ns
Normal Position	NO/NC
Height Seated (Max)	1.2mm
Length	5mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 3 weeks ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	16
ECCN Code	EAR99
Resistance	4.7Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	6.6mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG1433
Pin Count	16
Number of Outputs	6
Qualification Status	Not Qualified
Operating Supply Voltage	12V
Number of Channels	3
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Operating Supply Current	260μA
Power Dissipation	6.6mW
Max Supply Current	475μA
Turn On Delay Time	170 ns
Number of Inputs	3
Voltage - Supply, Single/Dual (±)	5V~16.5V ±4.5V~16.5V
Supply Type	Dual, Single
Bandwidth	200MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	75 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	4.7Ohm
Min Dual Supply Voltage	4.5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	70 dB
Current - Leakage (IS(off)) (Max)	300pA
Channel Capacitance (CS(off), CD(off))	12pF 22pF
On-state Resistance Match-Nom	0.55Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	170ns, 75ns
Insertion Loss (dB)	0.24 dB
Charge Injection	-50pC
Channel-to-Channel Matching (ΔRon)	500m Ω

ADG1433YRUZ-REEL Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a number of circuits 2:1. Around -40°C~125°C TA is the extended operating temperature. In total, 16 terminations have occurred. This electronic part offers high-quality output due to its 3 channels. When a voltage supply of 5V is used, the electronic component should be turned on and run. An electrical component of this type can be found in the 16 series. Multiplexers built on a SPDT switching circuit are built. Try searching for the analog switch ic with ADG1433 if you are looking for variants. It has an internal resistance of 4.7Ohm. The datasheets for the 16 pins explain the functions. The analog multiplexer shown here is a typical Multiplexer or Switches. Users shouldn't supply more than 16.5V voltage to the switch device. Dual, Single supply type digital switch with a low cost. It is recommended to use 5V as the lowest voltage for the electrical part. In order to operate this switch device, it would need a current of 260μA. It may damage the digital multiplexer if the voltage is higher than 475μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 16.5V. In the case of dual power supplies, you should connect at least 4.5V. 12V operating voltages can be used with this electrical part. Operating 3 inputs is required. There are various bandwidths available for data transfer. The analog switch ics has 6 outputs.