ADG1433YRUZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-TSSOP |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 4.7Ohm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 6.6mW |
| Base Part Number | ADG1433 |
| Number of Outputs | 6 |
| Operating Supply Voltage | 12V |
| Number of Channels | 3 |
| Interface | Parallel |
| Number of Circuits | 3 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 5V |
| Test Frequency | 1MHz |
| Operating Supply Current | 260μA |
| Power Dissipation | 6.6mW |
| Max Supply Current | 475μA |
| Throw Configuration | SPDT |
| Turn On Delay Time | 170 ns |
| Number of Inputs | 3 |
| Voltage - Supply, Single/Dual (±) | 5V~16.5V ±4.5V~16.5V |
| Supply Type | Dual, Single |
| Bandwidth | 200MHz |
| Turn-Off Delay Time | 75 ns |
| Max Dual Supply Voltage | 16.5V |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 4.7Ohm |
| Min Dual Supply Voltage | 4.5V |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 300pA |
| Channel Capacitance (CS(off), CD(off)) | 12pF 22pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 170ns, 75ns |
| Insertion Loss (dB) | 0.24 dB |
| Charge Injection | -50pC |
| Channel-to-Channel Matching (ΔRon) | 500mOhm |
| Crosstalk | -70dB @ 1MHz |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG1433YRUZ-REEL7 Overview
As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. High reliability is achieved by using advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 2:1. The operating temperature is extended to around -40°C~125°C TA. The electronic part provides high-quality output because it has 3 channels. Unlike digital switches, these are based on SPDT switching circuits. There are 3 circuits in this multiplexer. ADG1433 can be used to search for analog multiplexer variants. There is 4.7Ohm internal resistance in this digital multiplexer. Datasheets for 16 pin functions are available upon request. normally, users should not supply switches with voltages higher than 16.5V. Digital switch that provides Dual, Single power at a cost-effective price. A low voltage of 5V should be applied to the electronic component. The analogue multiplexer could operate on 260μA current. The switch multiplexer may be damaged if it is exposed to voltage greater than 475μA. Despite this switch device's dual supply capability, its voltage should not exceed 16.5V. For dual power supplies, a voltage of at least 4.5V should be attached. 12V operating voltages are supported by the electronic component. Among the inputs that can be operated are the 3 inputs. 200MHz bandwidths enable data to be transferred. An environment with a temperature greater than 125°C should not be used to operate the digital switches. There are 6 outputs on the analogue multiplexer. There is a 16-TSSOP package offered by suppliers.
ADG1433YRUZ-REEL7 Features
3 Channels
Switch Circuit: SPDT
260μA Supply Current
-3db Bandwidth: 200MHz
Bandwidth: 200MHz
ADG1433YRUZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG1433YRUZ-REEL7 Analog Switches & Multiplexers ICs applications.
- FTTH
- DSLAMs
- Remote Powered Equipment
- Frame Relay Equipment
- Optical Applications
- Cable PC
- Communications systems
- Automotive applications
- E1 Network Equipment
- 65 V DACs
