ADG1434YCPZ-REEL

170ns, 75ns SPDT 4.7Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG1434 20 Pins 300pA 5V 20-WFQFN Exposed Pad, CSP

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1434YCPZ-REEL
Package: 20-WFQFN Exposed Pad, CSP
Datasheet: PDF
Stock: 705
Description: 170ns, 75ns SPDT 4.7Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG1434 20 Pins 300pA 5V 20-WFQFN Exposed Pad, CSP(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	20-WFQFN Exposed Pad, CSP
Surface Mount	YES
Number of Pins	20
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
ECCN Code	EAR99
Resistance	4.7Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	6.6mW
Technology	CMOS
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	ADG1434
Pin Count	20
Number of Outputs	8
Qualification Status	Not Qualified
Operating Supply Voltage	12V
Polarity	Non-Inverting
Number of Channels	4
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Power Dissipation	6.6mW
Max Supply Current	475μA
Turn On Delay Time	170 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	5V~16.5V ±4.5V~16.5V
Supply Type	Dual, Single
Bandwidth	200MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	75 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	4.7Ohm
Min Dual Supply Voltage	4.5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	70 dB
Current - Leakage (IS(off)) (Max)	300pA
Channel Capacitance (CS(off), CD(off))	12pF 22pF
On-state Resistance Match-Nom	0.55Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	170ns, 75ns
Insertion Loss (dB)	0.24 dB
Charge Injection	-50pC
Channel-to-Channel Matching (ΔRon)	500m Ω
Crosstalk	-70dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Normal Position	NO/NC
Height Seated (Max)	1mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1434YCPZ-REEL Overview

Shipping overseas is convenient due to the electrical component's packing in 20-WFQFN Exposed Pad, CSP. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. The operating temperature is extended to around -40°C~125°C TA. Total terminations are 20. The electronic part provides high-quality output because it has 4 channels. An 5V voltage supply should allow the electrical part to be turned on and run. An electrical component of this type can be found in the 20 series. Based on SPDT switching circuits, these analog multiplexers work. Try searching for the analog switch ic with ADG1434 if you are looking for variants. This digital multiplexer has 4.7Ohm internal resistance. For details about the functions of 20 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Multiplexers should not be powered above 16.5V in normal situations. Dual, Single supply type digital switch with a low cost. A low voltage of 5V should be applied to the electronic component. The analogue multiplexer may be damaged if voltage is greater than 475μA. If put voltage greater than 16.5V on the multiplexer, damage may be caused to the device. In the case of dual power supplies, you should connect at least 4.5V. This electrical part is compatible with 12V operating voltages. It is possible to operate 4 inputs. The transfer of data can be performed over 200MHz bandwidths. 8 outputs are included in the analogue multiplexer.