ADG1434YRUZ

170ns, 75ns SPDT 4.7Ohm Analog Switches BREAK-BEFORE-MAKE ADG1434 20 Pins 300pA 5V 20-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1434YRUZ
Package: 20-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 846
Description: 170ns, 75ns SPDT 4.7Ohm Analog Switches BREAK-BEFORE-MAKE ADG1434 20 Pins 300pA 5V 20-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	20-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	20
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
ECCN Code	EAR99
Resistance	4.7Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	6.6mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG1434
Pin Count	20
Number of Outputs	8
Operating Supply Voltage	12V
Polarity	Non-Inverting
Number of Channels	4
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Nominal Supply Current	260μA
Power Dissipation	6.6mW
Max Supply Current	475μA
Turn On Delay Time	170 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	5V~16.5V ±4.5V~16.5V
Supply Type	Dual, Single
Bandwidth	200MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	75 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	4.7Ohm
Min Dual Supply Voltage	4.5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	70 dB
Current - Leakage (IS(off)) (Max)	300pA
Channel Capacitance (CS(off), CD(off))	12pF 22pF
On-state Resistance Match-Nom	0.55Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	170ns, 75ns
Insertion Loss (dB)	0.24 dB
Charge Injection	-50pC
Channel-to-Channel Matching (ΔRon)	500m Ω
Crosstalk	-70dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	4Ohm
Height	1.05mm
Length	6.5mm
Width	4.4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1434YRUZ Overview

Shipping overseas is convenient with the electronic component packed in 20-TSSOP (0.173, 4.40mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tube. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a number of circuits 2:1. Operating temperature around -40°C~125°C TA extended. Total terminations are 20. A electrical component with 4 channels is capable of high-quality output. When a voltage supply of 5V is used, the electronic component should be turned on and run. This electrical component is included in the 20 series of products. SPDT switching circuits are used in these analog switch ics. Try searching for the analog switch ic with ADG1434 if you are looking for variants. The internal resistance of this digital multiplexer is 4.7Ohm. The functions of 20 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. normally, users should not supply switches with voltages higher than 16.5V. A analog switch ic that has a cost-effective Dual, Single supply type. There should be 5V voltage fed to the electrical part below 5V. A digital multiplexer may suffer damage if voltage is applied above 475μA. For this switch, a dual supply voltage is feasible, but it must not exceed 16.5VWith dual power supplies, you should attach at least 4.5V. The electronic component can function from 12V. Operating 4 inputs is required. The transfer of data can be performed over 200MHz bandwidths. Drain to Source resistance for this electronic component is 4Ohm. There are 8 outputs on the analogue multiplexer.