ADG1434YRUZ-REEL

170ns, 75ns SPDT 4.7Ohm Analog Switches BREAK-BEFORE-MAKE ADG1434 20 Pins 300pA 5V 20-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1434YRUZ-REEL
Package: 20-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 711
Description: 170ns, 75ns SPDT 4.7Ohm Analog Switches BREAK-BEFORE-MAKE ADG1434 20 Pins 300pA 5V 20-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 4 weeks ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	20-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	20
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
ECCN Code	EAR99
Resistance	4.7Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	6.6mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG1434
Pin Count	20
Number of Outputs	8
Qualification Status	Not Qualified
Operating Supply Voltage	12V
Polarity	Non-Inverting
Number of Channels	4
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Operating Supply Current	260μA
Power Dissipation	6.6mW
Max Supply Current	475μA
Turn On Delay Time	170 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	5V~16.5V ±4.5V~16.5V
Supply Type	Dual, Single
Bandwidth	200MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	75 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	4.7Ohm
Min Dual Supply Voltage	4.5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	70 dB
Current - Leakage (IS(off)) (Max)	300pA
Channel Capacitance (CS(off), CD(off))	12pF 22pF
On-state Resistance Match-Nom	0.55Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	170ns, 75ns
Insertion Loss (dB)	0.24 dB
Charge Injection	-50pC
Channel-to-Channel Matching (ΔRon)	500m Ω
Crosstalk	-70dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Normal Position	NO/NC
Height Seated (Max)	1.2mm
Length	6.5mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1434YRUZ-REEL Overview

Packed in 20-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. High reliability is achieved by using advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. 2:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around -40°C~125°C TA. There are 20 terminations totally. The electronic part provides high-quality output because it has 4 channels. When a voltage supply of 5V is used, the electronic component should be turned on and run. A key feature of the 20 series is the inclusion of this electronic part as part of its design. Based on SPDT switching circuits, these analog multiplexers work. Search with ADG1434 if you are looking for analog multiplexer variants. The internal resistance of this digital multiplexer is 4.7Ohm. The datasheets for the 20 pins explain the functions. It is a typical Multiplexer or Switches analog multiplexer. Users shouldn't supply more than 16.5V voltage to the switch device. A analog switch ic that has a cost-effective Dual, Single supply type. In order for the electronic part to function properly, the lowest voltage should be 5V. An operating current of 260μA would be sufficient for this switch device. Put voltage above 475μA on the multiplexer to cause damage. Despite this switch's dual supply capability, its voltage should not exceed 16.5V. A dual power supply should have at least 4.5V voltage attached. The electronic component can function from 12V. Among the inputs that can be operated are the 4 inputs. There are various bandwidths available for data transfer. 8 outputs are included in the analogue multiplexer.