ADG1436YCPZ-REEL7

120ns, 130ns SPDT 1.8Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG1436 16 Pins 550pA 5V 16-VQFN Exposed Pad, CSP

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1436YCPZ-REEL7
Package: 16-VQFN Exposed Pad, CSP
Datasheet: PDF
Stock: 166
Description: 120ns, 130ns SPDT 1.8Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG1436 16 Pins 550pA 5V 16-VQFN Exposed Pad, CSP(Kg)

Details

Tags

Parameters
Switch Time (Ton, Toff) (Max)	120ns, 130ns
Insertion Loss (dB)	-0.18 dB
Charge Injection	-20pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-80dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	1.8Ohm
Height Seated (Max)	1mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	16-VQFN Exposed Pad, CSP
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	16
ECCN Code	EAR99
Resistance	1.8Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	30μW
Technology	CMOS
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG1436
Pin Count	16
Number of Outputs	4
Operating Supply Voltage	12V
Polarity	Non-Inverting
Number of Channels	1
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	100kHz
Power Dissipation	30μW
Max Supply Current	285μA
Turn On Delay Time	120 ns
Number of Inputs	2
Voltage - Supply, Single/Dual (±)	5V~16.5V ±4.5V~16.5V
Supply Type	Dual, Single
Bandwidth	110MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	130 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	1.8Ohm
Min Dual Supply Voltage	4.5V
High Level Output Current	300mA
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	80 dB
Current - Leakage (IS(off)) (Max)	550pA
Channel Capacitance (CS(off), CD(off))	23pF 50pF
On-state Resistance Match-Nom	0.13Ohm
Switch Circuit	SPDT

ADG1436YCPZ-REEL7 Overview

The electronic component is convenient to ship overseas because it is packed in a 16-VQFN Exposed Pad, CSP. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 2:1. Operation at a temperature around -40°C~125°C TA. Total terminations are 16. The electronic part delivers high-quality output through its 1 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. An electrical component like this is included in the 16 series. SPDT switching circuits are used in these analog switch ics. Try searching with ADG1436 if you're looking for variants. It has an internal resistance of 1.8Ohm. To find out what the 16 pins do, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. A voltage higher than 16.5V should not normally be supplied to the switches. Analogue multiplexers of the Dual, Single supply type that are cost-effective. It is recommended that the electrical component receives a voltage of 5V. Put voltage above 285μA on the multiplexer to cause damage. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 16.5V. You should attach at least 4.5V voltage if you are using dual power supply. It can operate from 12V operating voltages. Operating 2 inputs is required. There are 110MHz bandwidths for data transfer. There is 1.8Ohm resistance between the Drain and Source on this part. The analog switch ics includes 4 outputs.