ADG1436YRUZ

120ns, 130ns SPDT 1.8Ohm Analog Switches BREAK-BEFORE-MAKE ADG1436 16 Pins 550pA 5V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1436YRUZ
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 116
Description: 120ns, 130ns SPDT 1.8Ohm Analog Switches BREAK-BEFORE-MAKE ADG1436 16 Pins 550pA 5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	1.8Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	30μW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG1436
Pin Count	16
Number of Outputs	4
Operating Supply Voltage	12V
Number of Channels	1
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	100kHz
Power Dissipation	30μW
Max Supply Current	285μA
Turn On Delay Time	120 ns
Number of Inputs	2
Voltage - Supply, Single/Dual (±)	5V~16.5V ±4.5V~16.5V
Supply Type	Dual, Single
Bandwidth	110MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	130 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	1.8Ohm
Min Dual Supply Voltage	4.5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	80 dB
Current - Leakage (IS(off)) (Max)	550pA
Channel Capacitance (CS(off), CD(off))	23pF 50pF
On-state Resistance Match-Nom	0.13Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	120ns, 130ns
Insertion Loss (dB)	-0.18 dB
Charge Injection	-20pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-80dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Height	1.05mm
Length	5mm
Width	4.4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1436YRUZ Overview

The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). The advanced packaging method Tube provides high reliability. In Surface Mount, you'll find this switch device. There is 2:1 ratio between the number of multiplexers and demultiplexers. Temperatures around -40°C~125°C TA are extended for operation. 16 terminations have been made so far. The electronic part provides high-quality output because it has 1 channels. A 5V voltage supply should turn on and run the electronic component. A total of 16 pins are injected into the electrical part body. Based on SPDT switching circuits, these analog multiplexers work. Search with ADG1436 if you are looking for analog multiplexer variants. A 1.8Ohm internal resistance characterizes this multiplexer. For details about the functions of 16 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. An abnormal situation would be for the switch device to be supplied with a voltage greater than 16.5V. The analog switch ic is of the Dual, Single supply type and is cost-effective. It is recommended to use 5V as the lowest voltage for the electrical part. It may damage the digital multiplexer if the voltage is higher than 285μA. Despite this switch's dual supply capability, its voltage should not exceed 16.5V. A dual power supply should have at least 4.5V voltage attached. 12V operating voltages are supported by the electronic component. In order to operate the 2 inputs, there are several steps to follow. There are 110MHz bandwidths for data transfer. This digital multiplexer has 4 outputs.