ADG1436YRUZ-REEL7

120ns, 130ns SPDT 1.8Ohm Analog Switches BREAK-BEFORE-MAKE ADG1436 16 Pins 550pA 5V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1436YRUZ-REEL7
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 343
Description: 120ns, 130ns SPDT 1.8Ohm Analog Switches BREAK-BEFORE-MAKE ADG1436 16 Pins 550pA 5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 3 weeks ago)
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	1.8Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	30μW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG1436
Pin Count	16
Number of Outputs	4
Qualification Status	Not Qualified
Operating Supply Voltage	12V
Number of Channels	1
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	100kHz
Operating Supply Current	170μA
Power Dissipation	30μW
Max Supply Current	285μA
Turn On Delay Time	120 ns
Number of Inputs	2
Voltage - Supply, Single/Dual (±)	5V~16.5V ±4.5V~16.5V
Supply Type	Dual, Single
Bandwidth	110MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	130 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	1.8Ohm
Min Dual Supply Voltage	4.5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	80 dB
Current - Leakage (IS(off)) (Max)	550pA
Channel Capacitance (CS(off), CD(off))	23pF 50pF
On-state Resistance Match-Nom	0.13Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	120ns, 130ns
Insertion Loss (dB)	-0.18 dB
Charge Injection	-20pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-80dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Length	5mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1436YRUZ-REEL7 Overview

Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. It is mounted in the position Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Around -40°C~125°C TA is the extended operating temperature. Total terminations are 16. A 1 channel electronic part produces high-quality output. With a 5V voltage supply, the electrical component should be turned on and run. A total of 16 pins are injected into the electrical part body. Multiplexers built on a SPDT switching circuit are built. Try searching with ADG1436 to find analog multiplexer variants. In this multiplexer, the internal resistance is 1.8Ohm. You can find the functions of the 16 pins in the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. normally, users should not supply switches with voltages higher than 16.5V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. There should be 5V voltage fed to the electrical part below 5V. This digital switch can be operated with a current of 170μA. It may damage the digital multiplexer if the voltage is higher than 285μA. Despite this switch device's dual supply capability, its voltage should not exceed 16.5V. You should attach at least 4.5V voltage if you are using dual power supply. The electronic component can function from 12V. Operating the 2 inputs requires 2 inputs. The transfer of data can be performed over 110MHz bandwidths. A analog switch ics with 4 outputs is included.