ADG1438BCPZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 11.5Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG1438 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 12V |
| Number of Channels | 8 |
| Interface | Serial |
| Number of Circuits | 1 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 5V |
| Analog IC - Other Type | SPDT |
| Power Dissipation | 30nW |
| Voltage - Supply, Single/Dual (±) | 5V~16.5V ±4.5V~16.5V |
| Bandwidth | 82MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Max Dual Supply Voltage | 16.5V |
| On-State Resistance (Max) | 11.5Ohm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 150pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 58pF |
| On-state Resistance Match-Nom | 0.6Ohm |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 550m Ω |
| Crosstalk | -70dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 350ns |
| Switch-off Time-Max | 350ns |
| Drain to Source Resistance | 11.5Ohm |
| Signal Current-Max | 0.03A |
| Length | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG1438BCPZ-REEL7 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 20-WFQFN Exposed Pad, CSP. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have the same number of circuits 8:1. Extended operating temperature around -40°C~125°C TA. Total terminations are 20. A high-quality output is provided by the electrical component's 8 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. 20 pins are injected to the electronic part body. There are 1 circuits in this multiplexer. Try searching with ADG1438 if you're looking for variants. There is 11.5Ohm internal resistance in this digital multiplexer. Please refer to the datasheets for 20 pins functions. A analogue multiplexer of this type is a Multiplexer or Switches. Users should never supply a voltage higher than 16.5V to a switch device. It is recommended that the electrical component receives a voltage of 5V. Despite this switch device's dual supply capability, its voltage should not exceed 16.5V. When using dual power supplies, you should attach at least 4.5V. It is integrated with SPDT analog ICs. A voltage of 12V can be used to operate the electronic component. There are 82MHz bandwidths for data transfer. Resistivity from Drain to Source is 11.5Ohm for this electronic part.
ADG1438BCPZ-REEL7 Features
8 Channels
Bandwidth: 82MHz
Drain-to-Source resistance: 11.5Ohm
ADG1438BCPZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG1438BCPZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Data Acquisition Systems
- MP3 players
- Multiplexers
- Audio and video routing
- Audio and video signal routing
- Fiber to the Home
- E1 Network Equipment
- SDH
- Industrial
- Optical Applications
