ADG1438BRUZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 9.5Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADG1438 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 12V |
| Number of Channels | 8 |
| Interface | Serial |
| Number of Circuits | 1 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 5V |
| Analog IC - Other Type | SPDT |
| Nominal Supply Current | 1μA |
| Power Dissipation | 30nW |
| Voltage - Supply, Single/Dual (±) | 5V~16.5V ±4.5V~16.5V |
| Bandwidth | 82MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Max Dual Supply Voltage | 16.5V |
| On-State Resistance (Max) | 11.5Ohm |
| Min Dual Supply Voltage | 4.5V |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 150pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 58pF |
| On-state Resistance Match-Nom | 0.6Ohm |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 550m Ω |
| Crosstalk | -70dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 350ns |
| Switch-off Time-Max | 350ns |
| Signal Current-Max | 0.03A |
| Height | 1.2mm |
| Length | 6.6mm |
| Width | 4.5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG1438BRUZ Overview
Shipping overseas is convenient with the electronic component packed in 20-TSSOP (0.173, 4.40mm Width). Advanced packaging method Tube is used to provide high reliability. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a number of circuits 8:1. Operating temperature extended to -40°C~125°C TA. There are 20 terminations totally. High-quality output is provided by the electronic component's 8 channels. An 5V voltage supply should allow the electrical part to be turned on and run. As part of its design, the 20 series is equipped with this electronic component. It consists of 1 circuits. Try searching for ADG1438 variants of the analog switch ic. The internal resistance of this digital multiplexer is 9.5Ohm. The datasheets for the 20 pins explain the functions. In this analog multiplexer, the value is Multiplexer or Switches. normally, users should not supply switches with voltages higher than 16.5V. 5V should be the lowest voltage fed to the electronic component. If put voltage greater than 16.5V on the multiplexer, damage may be caused to the device. For dual power supplies, a voltage of at least 4.5V should be attached. It is integrated with a SPDT analog IC. It can operate from 12V operating voltages. The transfer of data can be performed over 82MHz bandwidths.
ADG1438BRUZ Features
8 Channels
Bandwidth: 82MHz
ADG1438BRUZ Applications
There are a lot of Analog Devices Inc. ADG1438BRUZ Analog Switches & Multiplexers ICs applications.
- Automotive applications
- Digital access cross connects
- Channel Banks
- DSLAMs
- Relay replacements
- Precision data acquisition
- Optical Applications
- Sample-and-hold systems
- New designs requiring multiplexer functions
- Isolation
