Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 month ago) |
Mounting Type |
Surface Mount |
Package / Case |
20-WFQFN Exposed Pad, CSP |
Surface Mount |
YES |
Number of Pins |
20 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Resistance |
11.5Ohm |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG1439 |
Pin Count |
20 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
12V |
Number of Channels |
4 |
Interface |
Serial |
Number of Circuits |
2 |
Max Supply Voltage |
16.5V |
Min Supply Voltage |
5V |
Analog IC - Other Type |
SPDT |
Power Dissipation |
30nW |
Number of Inputs |
8 |
Voltage - Supply, Single/Dual (±) |
5V~16.5V ±4.5V~16.5V |
Bandwidth |
130MHz |
Supply Current-Max (Isup) |
0.001mA |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Max Dual Supply Voltage |
16.5V |
On-State Resistance (Max) |
11.5Ohm |
Min Dual Supply Voltage |
4.5V |
Multiplexer/Demultiplexer Circuit |
4:1 |
Off-state Isolation-Nom |
70 dB |
Current - Leakage (IS(off)) (Max) |
150pA |
Channel Capacitance (CS(off), CD(off)) |
9pF 28pF |
On-state Resistance Match-Nom |
0.6Ohm |
Switch Circuit |
SP4T |
Charge Injection |
4pC |
Channel-to-Channel Matching (ΔRon) |
550m Ω |
Crosstalk |
-70dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
350ns |
Switch-off Time-Max |
350ns |
Signal Current-Max |
0.03A |
Height Seated (Max) |
1mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG1439BCPZ-REEL7 Overview
Presented in 20-WFQFN Exposed Pad, CSP, this electrical component is convenient for overseas shipping. High reliability is achieved by using advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a number of circuits 4:1. Operation at a temperature around -40°C~125°C TA. Total terminations are 20. High-quality output is provided by the electronic component's 4 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. This electronic part can be found in the 20 series. SP4T switching circuits are used in these analog switch ics. There are 2 circuits in this switch device. Try searching for the analog switch ic with ADG1439 if you are looking for variants. Internally, this switch multiplexer has a resistance of 11.5Ohm. The functions of 20 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. An abnormal situation would be for the switch device to be supplied with a voltage greater than 16.5V. It is recommended that the electrical component receives a voltage of 5V. Despite this switch device's dual supply capability, its voltage should not exceed 16.5V. It is recommended that you attach at least 4.5V to your dual power supply. It is integrated with SPDT analog ICs. This electrical part is compatible with 12V operating voltages. It is possible to operate 8 inputs. 130MHz bandwidths enable data to be transferred.
ADG1439BCPZ-REEL7 Features
4 Channels
Switch Circuit: SP4T
Bandwidth: 130MHz
ADG1439BCPZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG1439BCPZ-REEL7 Analog Switches & Multiplexers ICs applications.
- High speed data transmission line cards
- Cable Modem
- Data switching
- Medical Instrumentation
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Optical Applications
- Avionics and Military Systems
- ATM
- Relay Replacement
- Video signal routing