ADG1439BRUZ

SP4T 11.5Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG1439 20 Pins 150pA 5V 20-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1439BRUZ
Package: 20-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 262
Description: SP4T 11.5Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG1439 20 Pins 150pA 5V 20-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Mounting Type	Surface Mount
Package / Case	20-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	20
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
ECCN Code	EAR99
Resistance	11.5Ohm
Terminal Finish	MATTE TIN
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	ADG1439
Pin Count	20
Qualification Status	Not Qualified
Operating Supply Voltage	12V
Number of Channels	4
Interface	Serial
Number of Circuits	2
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Analog IC - Other Type	SPDT
Nominal Supply Current	1nA
Power Dissipation	30nW
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	5V~16.5V ±4.5V~16.5V
Bandwidth	130MHz
Supply Current-Max (Isup)	0.001mA
Neg Supply Voltage-Nom (Vsup)	-5V
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	11.5Ohm
Min Dual Supply Voltage	4.5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	70 dB
Current - Leakage (IS(off)) (Max)	150pA
Channel Capacitance (CS(off), CD(off))	9pF 28pF
On-state Resistance Match-Nom	0.6Ohm
Switch Circuit	SP4T
Charge Injection	4pC
Channel-to-Channel Matching (ΔRon)	550m Ω
Crosstalk	-70dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	350ns
Switch-off Time-Max	350ns
Signal Current-Max	0.03A
Height	1.2mm
Length	6.6mm
Width	4.5mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1439BRUZ Overview

Due to its 20-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tube. This analog switch is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 4:1. Temperatures around -40°C~125°C TA are extended for operation. Total terminations are 20. The electronic part delivers high-quality output through its 4 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. It is part of the design of the 20 series that this electronic component is included. These analog multiplexers are built based on SP4T switching circuits. There are 2 circuits in this switch device. Try searching with ADG1439 if you're looking for variants. The internal resistance of this digital multiplexer is 11.5Ohm. You can find the functions of the 20 pins in the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 16.5V. It is recommended to use 5V as the lowest voltage for the electrical part. If put voltage greater than 16.5V on the multiplexer, damage may be caused to the device. A dual power supply should have at least 4.5V voltage attached. This product is integrated with an analog integrated circuit (IC) of type SPDT. A voltage of 12V can be used to operate the electronic component. Among the inputs that can be operated are the 8 inputs. In 130MHz-bandwidths, data can be transferred.