Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Mounting Type |
Surface Mount |
Package / Case |
20-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
20 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Resistance |
11.5Ohm |
Terminal Finish |
MATTE TIN |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG1439 |
Pin Count |
20 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
12V |
Number of Channels |
4 |
Interface |
Serial |
Number of Circuits |
2 |
Max Supply Voltage |
16.5V |
Min Supply Voltage |
5V |
Analog IC - Other Type |
SPDT |
Operating Supply Current |
1nA |
Power Dissipation |
30nW |
Logic Function |
Multiplexer |
Number of Inputs |
8 |
Voltage - Supply, Single/Dual (±) |
5V~16.5V ±4.5V~16.5V |
Supply Type |
Dual, Single |
Bandwidth |
130MHz |
Supply Current-Max (Isup) |
0.001mA |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Max Dual Supply Voltage |
16.5V |
On-State Resistance (Max) |
11.5Ohm |
Min Dual Supply Voltage |
4.5V |
Multiplexer/Demultiplexer Circuit |
4:1 |
Off-state Isolation-Nom |
70 dB |
Current - Leakage (IS(off)) (Max) |
150pA |
Channel Capacitance (CS(off), CD(off)) |
9pF 28pF |
On-state Resistance Match-Nom |
0.6Ohm |
Switch Circuit |
SP4T |
Charge Injection |
4pC |
Channel-to-Channel Matching (ΔRon) |
550m Ω |
Crosstalk |
-70dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
350ns |
Switch-off Time-Max |
350ns |
Signal Current-Max |
0.03A |
Length |
6.5mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG1439BRUZ-REEL7 Overview
Shipping overseas is convenient with the electronic component packed in 20-TSSOP (0.173, 4.40mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have the same number of circuits 4:1. Temperatures around -40°C~125°C TA are extended for operation. The total number of terminations is 20. Due to its 4 channels, the electrical component produces high-quality output. Powered by a 5V voltage supply, the electrical part should be switched on and run. Into the electrical component body are injected 20 pins. A SP4T switching circuit is used for these analog switches. This multiplexer is composed of 2 circuits. Try searching with ADG1439 if you're looking for variants. It has an internal resistance of 11.5Ohm. For functions related to 20 pins, please refer to the datasheets. In a normalsituation, users should not supply the switches with voltage higher than 16.5V. A analog switch ic that has a cost-effective Dual, Single supply type. The lowest voltage the electronic part should receive is 5V. 1nA current would be enough for this multiplexer to operate. Despite this switch's dual supply capability, its voltage should not exceed 16.5V. The voltage should be at least 4.5V if you are using dual power supplies. Integrated with SPDT analog IC. There is a voltage range of 12V operating voltages for the electrical part. Among the inputs that can be operated are the 8 inputs. 130MHz-bandwidths can be used to transfer data between multiplexers.
ADG1439BRUZ-REEL7 Features
4 Channels
Switch Circuit: SP4T
1nA Supply Current
Bandwidth: 130MHz
ADG1439BRUZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG1439BRUZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Precision test equipment
- Cross Connects
- Automatic test equipment
- Intelligent PBX
- ISDN NT1/TA
- Relay replacements
- Voice over IP/DSL – Integrated Access Devices, Smart
- SDH
- Precision instrumentation
- Industrial