Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
14 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Resistance |
1.1Ohm |
Terminal Finish |
MATTE TIN |
Max Power Dissipation |
2.8mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG1604 |
Pin Count |
14 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5V |
Number of Channels |
4 |
Interface |
Parallel |
Number of Circuits |
1 |
Max Supply Voltage |
16V |
Min Supply Voltage |
3.3V |
Operating Supply Current |
230μA |
Power Dissipation |
2.8mW |
Logic Function |
Multiplexer |
Voltage - Supply, Single/Dual (±) |
3.3V~16V ±3.3V~8V |
Supply Type |
Dual, Single |
Bandwidth |
19MHz |
Supply Current-Max (Isup) |
0.36mA |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Turn-Off Delay Time |
95 ns |
Max Dual Supply Voltage |
8V |
On-State Resistance (Max) |
1.1Ohm |
Min Dual Supply Voltage |
3.3V |
Multiplexer/Demultiplexer Circuit |
4:1 |
Off-state Isolation-Nom |
70 dB |
Current - Leakage (IS(off)) (Max) |
200pA |
Channel Capacitance (CS(off), CD(off)) |
60pF 270pF |
On-state Resistance Match-Nom |
0.04Ohm |
Switch Circuit |
SP4T |
Switch Time (Ton, Toff) (Max) |
95ns, 173ns |
Charge Injection |
125pC |
Channel-to-Channel Matching (ΔRon) |
30m Ω |
Crosstalk |
-70dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Signal Current-Max |
0.378A |
Length |
5mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG1604BRUZ-REEL Overview
Shipping overseas is convenient due to the electrical component's packing in 14-TSSOP (0.173, 4.40mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a ratio of 4:1. An extended operating temperature of -40°C~125°C TA degrees Celsius. There are 14 terminations totally. This electronic part offers high-quality output due to its 4 channels. An 5V voltage supply should allow the electrical part to be turned on and run. There are 14 pins injected into the electronic part body. The analog switch ics are built using SP4T switching circuits. This multiplexer is composed of 1 circuits. Look for analog switch ic variants by searching with ADG1604. A 1.1Ohm internal resistance characterizes this multiplexer. Datasheets for functions of 14 pins are available. Users shouldn't supply more than 16V voltage to the switch device. A cost-effective Dual, Single supply type analogue multiplexer. It is recommended that the electrical component receives a voltage of 3.3V. The switch device would be able to operate with 230μA current. For this switch, a dual supply voltage is feasible, but it must not exceed 8VA dual power supply should have at least 3.3V voltage attached. The electronic component can function from 5V. This switch operates within the bandwidth of 19MHz.
ADG1604BRUZ-REEL Features
4 Channels
Switch Circuit: SP4T
230μA Supply Current
Bandwidth: 19MHz
ADG1604BRUZ-REEL Applications
There are a lot of Analog Devices Inc. ADG1604BRUZ-REEL Analog Switches & Multiplexers ICs applications.
- Microprocessor controlled systems
- Audio signal routing
- SDH
- Relay Replacement
- Video signal routing
- MP3 players
- Cross Connects
- Data Acquisition Systems
- Access Concentrators
- Channel Banks