ADG1606BRUZ

128ns, 109ns 5Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG1606 28 Pins 150pA 5V 28-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1606BRUZ
Package: 28-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 989
Description: 128ns, 109ns 5Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG1606 28 Pins 150pA 5V 28-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 3 weeks ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	28-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	28
Manufacturer Package Identifier	RU-28
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	28
ECCN Code	EAR99
Resistance	5Ohm
Max Power Dissipation	3.6mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.65mm
Base Part Number	ADG1606
Output	COMMON OUTPUT
Pin Count	28
Operating Supply Voltage	5V
Polarity	Non-Inverting
Number of Channels	16
Interface	Parallel
Number of Circuits	1
Max Supply Voltage	16V
Min Supply Voltage	3.3V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Nominal Supply Current	300μA
Power Dissipation	3.6mW
Input Voltage (Max)	8V
Number of Inputs	16
Voltage - Supply, Single/Dual (±)	3.3V~16V ±3.3V~8V
Bandwidth	22MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	90 ns
Max Dual Supply Voltage	8V
On-State Resistance (Max)	5Ohm
Min Dual Supply Voltage	3.3V
Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	16:1
Off-state Isolation-Nom	62 dB
Current - Leakage (IS(off)) (Max)	150pA
Channel Capacitance (CS(off), CD(off))	18pF 240pF
On-state Resistance Match-Nom	0.2Ohm
Switch Time (Ton, Toff) (Max)	128ns, 109ns
Charge Injection	33pC
Channel-to-Channel Matching (ΔRon)	200m Ω
Crosstalk	-62dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	202ns
Max Junction Temperature (Tj)	150°C
On-State Resistance	4.5Ohm
Height	1.2mm
Length	9.8mm
Width	4.5mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1606BRUZ Overview

As the electronic part is packed in 28-TSSOP (0.173, 4.40mm Width), international shipping is convenient. To ensure high reliability, a new packaging method Tube is used. There is an analog multiplexer mounted in position Surface Mount. In the multiplexer and demultiplexer, 16:1 represents the number of circuits. An extended operating temperature of -40°C~125°C TA degrees Celsius. Totally, there are 28 terminations. This electronic part offers high-quality output due to its 16 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. An electrical component of this type can be found in the 28 series. It consists of 1 circuits. Try searching with ADG1606 to find analog multiplexer variants. An switch multiplexer with 5Ohm internal resistance has a value of 5Ohm. The datasheets for the 28 pins explain the functions. In a normalsituation, users should not supply the switches with voltage higher than 16V. The lowest voltage fed to the electronic component should be 3.3V. For this multiplexer, dual supply voltage is feasible, but it should not exceed 8V. It is recommended that you attach at least 3.3V to your dual power supply. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs. As far as the outputs go, this switch multiplexer utilizes COMMON OUTPUT of them. Operating voltages of 5V are compatible with the electrical part. A 16 input needs to be operated. A 22MHz-bandwidth can be used for data transfer.