Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
28-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
28 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
28 |
ECCN Code |
EAR99 |
Resistance |
5Ohm |
Max Power Dissipation |
3.6mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
ADG1606 |
Output |
COMMON OUTPUT |
Pin Count |
28 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5V |
Polarity |
Non-Inverting |
Number of Channels |
16 |
Interface |
Parallel |
Number of Circuits |
1 |
Max Supply Voltage |
16V |
Min Supply Voltage |
3.3V |
Operating Supply Current |
300μA |
Power Dissipation |
3.6mW |
Logic Function |
Multiplexer |
Input Voltage (Max) |
8V |
Voltage - Supply, Single/Dual (±) |
3.3V~16V ±3.3V~8V |
Supply Type |
Dual, Single |
Bandwidth |
22MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Turn-Off Delay Time |
90 ns |
Max Dual Supply Voltage |
8V |
On-State Resistance (Max) |
5Ohm |
Min Dual Supply Voltage |
3.3V |
Dual Supply Voltage |
5V |
Multiplexer/Demultiplexer Circuit |
16:1 |
Off-state Isolation-Nom |
62 dB |
Current - Leakage (IS(off)) (Max) |
150pA |
Channel Capacitance (CS(off), CD(off)) |
18pF 240pF |
On-state Resistance Match-Nom |
0.2Ohm |
Switch Time (Ton, Toff) (Max) |
128ns, 109ns |
Charge Injection |
33pC |
Channel-to-Channel Matching (ΔRon) |
200m Ω |
Crosstalk |
-62dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-off Time-Max |
202ns |
Length |
9.7mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG1606BRUZ-REEL7 Overview
As the electronic part is packed in 28-TSSOP (0.173, 4.40mm Width), international shipping is convenient. High reliability is ensured by the advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 16:1. Around -40°C~125°C TA is the extended operating temperature. In total, there have been 28 terminations. Due to its 16 channels, the electrical component produces high-quality output. Powered by a 5V voltage supply, the electrical part should be switched on and run. Into the electrical component body are injected 28 pins. It consists of 1 circuits. Try searching with ADG1606 to find analog multiplexer variants. Analog switches have 5Ohm internal resistance. Datasheets for functions of 28 pins are available. Multiplexers should not be powered above 16V in normal situations. An effective Dual, Single supply digital multiplexer. It is recommended to use 3.3V as the lowest voltage for the electrical part. The switch device would be able to operate with 300μA current. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 8V. For dual power supplies, a voltage of at least 3.3V should be attached. In this switch multiplexer, there are COMMON OUTPUT outputs available. It can operate from 5V operating voltages. In 22MHz-bandwidths, data can be transferred.
ADG1606BRUZ-REEL7 Features
16 Channels
300μA Supply Current
Bandwidth: 22MHz
ADG1606BRUZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG1606BRUZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Data Acquisition Systems
- Fiber In The Loop (FITL)
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Automotive applications
- Battery Powered Systems
- SDH/SONET multiplexers
- Precision test equipment
- Central office
- Audio and video switching
- Industrial