Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Mounting Type |
Surface Mount |
Package / Case |
32-VFQFN Exposed Pad, CSP |
Surface Mount |
YES |
Number of Pins |
32 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
32 |
ECCN Code |
EAR99 |
Resistance |
5Ohm |
Terminal Finish |
Matte Tin (Sn) |
Max Power Dissipation |
1.85mW |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
NO LEAD |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.5mm |
Base Part Number |
ADG1607 |
Output |
COMMON OUTPUT |
Pin Count |
32 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5V |
Number of Channels |
8 |
Interface |
Parallel |
Number of Circuits |
2 |
Max Supply Voltage |
16V |
Min Supply Voltage |
3.3V |
Analog IC - Other Type |
DIFFERENTIAL MULTIPLEXER |
Power Dissipation |
1.85mW |
Input Voltage (Max) |
8V |
Number of Inputs |
16 |
Voltage - Supply, Single/Dual (±) |
3.3V~16V ±3.3V~8V |
Bandwidth |
38MHz |
Supply Current-Max (Isup) |
0.001mA |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Turn-Off Delay Time |
90 ns |
Max Dual Supply Voltage |
8V |
On-State Resistance (Max) |
5Ohm |
Min Dual Supply Voltage |
3.3V |
Dual Supply Voltage |
5V |
Multiplexer/Demultiplexer Circuit |
8:1 |
Off-state Isolation-Nom |
62 dB |
Current - Leakage (IS(off)) (Max) |
150pA |
Channel Capacitance (CS(off), CD(off)) |
18pF 120pF |
On-state Resistance Match-Nom |
0.2Ohm |
Switch Time (Ton, Toff) (Max) |
128ns, 109ns |
Charge Injection |
33pC |
Channel-to-Channel Matching (ΔRon) |
200m Ω |
Crosstalk |
-62dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Drain to Source Resistance |
5Ohm |
Signal Current-Max |
1.1A |
Length |
5mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG1607BCPZ-REEL7 Overview
This electronic part is conveniently packaged in 32-VFQFN Exposed Pad, CSP, making it easy to ship abroad. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a ratio of 8:1. Temperatures around -40°C~125°C TA are extended for operation. Totally, there are 32 terminations. As a result of its 8 channels, this electronic component provides high-quality output. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. As part of its design, the 32 series is equipped with this electronic component. Circuits number 2 make up this analogue multiplexer. Try searching for ADG1607 variants of the analog switch ic. There is 5Ohm internal resistance in this digital multiplexer. To find out what the 32 pins do, please refer to the datasheets. normally, users should not supply switches with voltages higher than 16V. The lowest voltage fed to the electronic component should be 3.3V. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 8V. In the case of dual power supplies, you should connect at least 3.3V. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module. A total of COMMON OUTPUT outputs are available on this analog switch ic. It can operate from 5V operating voltages. Operating the 16 inputs requires 16 inputs. In 38MHz-bandwidths, data can be transferred. Resistivity from Drain to Source is 5Ohm for this electronic part.
ADG1607BCPZ-REEL7 Features
8 Channels
Bandwidth: 38MHz
Drain-to-Source resistance: 5Ohm
ADG1607BCPZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG1607BCPZ-REEL7 Analog Switches & Multiplexers ICs applications.
- DSUs
- FTTH
- Transmit
- Access Concentrators
- Automotive applications
- Power routing
- Multi-Line E1 Interface Cards
- Switching Systems
- High speed data transmission line cards
- Medical