ADG1608BCPZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 4.5Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 3.6mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG1608 |
| Pin Count | 16 |
| Operating Supply Voltage | 12V |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 3.3V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Nominal Supply Current | 300μA |
| Power Dissipation | 3.6mW |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 3.3V~16V ±3.3V~8V |
| Bandwidth | 40MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 113 ns |
| Max Dual Supply Voltage | 8V |
| On-State Resistance (Max) | 4.5Ohm |
| Min Dual Supply Voltage | 3.3V |
| Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 64 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 19pF 117pF |
| On-state Resistance Match-Nom | 0.12Ohm |
| Switch Time (Ton, Toff) (Max) | 94ns, 93ns |
| Charge Injection | 29pC |
| Channel-to-Channel Matching (ΔRon) | 120m Ω |
| Crosstalk | -64dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 202ns |
| Signal Current-Max | 0.47A |
| Length | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG1608BCPZ-REEL7 Overview
Due to its 16-WFQFN Exposed Pad, CSP packaging, the electronic part is convenient for international shipping. High reliability is ensured by the advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. Multiplexer and demultiplexer circuits have a number 8:1. An extended operating temperature of -40°C~125°C TA degrees Celsius. In total, there are 16 terminations. The electronic part delivers high-quality output through its 8 channels. It is safe to turn on and run the electronic component with a 5V voltage supply. The electronic part body is injected with 16 pins. The multiplexer consists of 1 circuits. Try searching for the analog switch ic with ADG1608 if you are looking for variants. This digital multiplexer has 4.5Ohm internal resistance. For functions related to 16 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. A voltage higher than 16V should not normally be supplied to the switches. It is recommended to use 3.3V as the lowest voltage for the electrical part. Despite this switch device's dual supply capability, its voltage should not exceed 8V. If you are using a dual power supply, you should attach at least 3.3V. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER. A voltage of 12V can be used to operate the electronic component. There are 8 inputs to be operated. A 40MHz-bandwidth can be used for data transfer.
ADG1608BCPZ-REEL7 Features
8 Channels
Bandwidth: 40MHz
ADG1608BCPZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG1608BCPZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Communication systems
- Transmit
- Industrial control systems
- Data Acquisition Systems
- Channel Banks
- Precision data acquisition
- Public switching systems
- PDAs
- Audio and video switching
- Cable Modem
