Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
4.5Ohm |
Terminal Finish |
Matte Tin (Sn) |
Max Power Dissipation |
3.6mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG1608 |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5V |
Number of Channels |
8 |
Interface |
Parallel |
Number of Circuits |
1 |
Max Supply Voltage |
16V |
Min Supply Voltage |
3.3V |
Operating Supply Current |
300μA |
Power Dissipation |
3.6mW |
Logic Function |
Multiplexer |
Voltage - Supply, Single/Dual (±) |
3.3V~16V ±3.3V~8V |
Supply Type |
Dual, Single |
Bandwidth |
40MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Turn-Off Delay Time |
113 ns |
Max Dual Supply Voltage |
8V |
On-State Resistance (Max) |
4.5Ohm |
Min Dual Supply Voltage |
3.3V |
Dual Supply Voltage |
5V |
Multiplexer/Demultiplexer Circuit |
8:1 |
Off-state Isolation-Nom |
64 dB |
Current - Leakage (IS(off)) (Max) |
100pA |
Channel Capacitance (CS(off), CD(off)) |
19pF 117pF |
On-state Resistance Match-Nom |
0.12Ohm |
Switch Time (Ton, Toff) (Max) |
94ns, 93ns |
Charge Injection |
29pC |
Channel-to-Channel Matching (ΔRon) |
120m Ω |
Crosstalk |
-64dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-off Time-Max |
202ns |
Signal Current-Max |
0.29A |
Length |
5mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG1608BRUZ-REEL7 Overview
As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. Multiplexer and demultiplexer circuits have a number 8:1. Extended operating temperature around -40°C~125°C TA. 16 terminations have been made so far. High-quality output is provided by the electronic component's 8 channels. When a voltage supply of 5V is used, the electronic component should be turned on and run. An electrical component like this is included in the 16 series. The multiplexer consists of 1 circuits. Try searching for the analog switch ic with ADG1608 if you are looking for variants. As far as internal resistance is concerned, it has 4.5Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. normally, users should not supply switches with voltages higher than 16V. An effective Dual, Single supply digital multiplexer. It is recommended that the electrical component receives a voltage of 3.3V. For this digital switch to work, 300μA current would suffice. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 8V. For dual power supplies, a voltage of at least 3.3V should be attached. A voltage of 5V can be used to operate the electronic component. There are 40MHz bandwidths for data transfer.
ADG1608BRUZ-REEL7 Features
8 Channels
300μA Supply Current
Bandwidth: 40MHz
ADG1608BRUZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG1608BRUZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Wireless Local Loop
- PDH Multiplexers
- Video switching
- Isolation
- Microprocessor Controlled Analog Systems
- Precision data acquisition
- E1 Network Equipment
- RGB switches
- Low-Voltage
- New designs requiring multiplexer functions