ADG1611BRUZ-REEL

156ns, 87ns SPST - NC 1.1Ohm Analog Switches BREAK-BEFORE-MAKE ADG1611 16 Pins 300pA 5V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1611BRUZ-REEL
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 201
Description: 156ns, 87ns SPST - NC 1.1Ohm Analog Switches BREAK-BEFORE-MAKE ADG1611 16 Pins 300pA 5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	1.1Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	5.8mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG1611
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Power Supplies	3.3/12/+-5V
Number of Channels	1
Interface	Parallel
Number of Circuits	4
Max Supply Voltage	16V
Min Supply Voltage	3.3V
Test Frequency	1MHz
Operating Supply Current	320μA
Power Dissipation	5.8mW
Max Supply Current	480μA
Throw Configuration	SPST
Turn On Delay Time	212 ns
Voltage - Supply, Single/Dual (±)	3.3V~16V ±3.3V~8V
Supply Type	Dual, Single
Bandwidth	38MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	137 ns
Max Dual Supply Voltage	8V
On-State Resistance (Max)	1.1Ohm
Min Dual Supply Voltage	3.3V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	70 dB
Current - Leakage (IS(off)) (Max)	300pA
Channel Capacitance (CS(off), CD(off))	60pF 60pF
On-state Resistance Match-Nom	0.04Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	156ns, 87ns
Charge Injection	170pC
Channel-to-Channel Matching (ΔRon)	30m Ω
Crosstalk	-110dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	285ns
Switch-off Time-Max	159ns
Normal Position	NO
Height Seated (Max)	1.2mm
Length	5mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1611BRUZ-REEL Overview

As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. High reliability is achieved by using advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. The operating temperature is extended to around -40°C~125°C TA. The total number of terminations is 16. By its 1 channels, the electronic component provides high-quality output. When the electronic component is given a voltage of 5V, it should be turned on and run. This electrical component is included in the 16 series of products. Unlike digital switches, these are based on SPST - NC switching circuits. The multiplexer consists of 4 circuits. ADG1611 can be used to search for analog multiplexer variants. This digital multiplexer has 1.1Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. Multiplexers should not be powered above 16V in normal situations. Analogue multiplexer with a Dual, Single supply type that is cost-effective. 3.3V is the lowest voltage the electrical component should receive. 320μA current would be enough for this multiplexer to operate. The analogue multiplexer may be damaged if voltage is greater than 480μA. If put voltage greater than 8V on the multiplexer, damage may be caused to the device. The voltage should be at least 3.3V if you are using dual power supplies. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. 38MHz bandwidths enable data to be transferred.