ADG1612BRUZ

156ns, 87ns SPST - NO 1.1Ohm Analog Switches BREAK-BEFORE-MAKE ADG1612 16 Pins 300pA 5V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1612BRUZ
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 191
Description: 156ns, 87ns SPST - NO 1.1Ohm Analog Switches BREAK-BEFORE-MAKE ADG1612 16 Pins 300pA 5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	1.1Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	5.8mW
Technology	CMOS
Terminal Form	GULL WING
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	0.65mm
Base Part Number	ADG1612
Output	SEPARATE OUTPUT
Pin Count	16
Number of Channels	1
Interface	Parallel
Max Supply Voltage	16V
Min Supply Voltage	3.3V
Test Frequency	1MHz
Power Dissipation	5.8mW
Max Supply Current	480μA
Turn On Delay Time	212 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	3.3V~16V ±3.3V~8V
Supply Type	Dual, Single
Bandwidth	42MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	137 ns
Max Dual Supply Voltage	8V
-3db Bandwidth	38MHz
On-State Resistance (Max)	1.1Ohm
Min Dual Supply Voltage	3.3V
Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	70 dB
Current - Leakage (IS(off)) (Max)	300pA
Channel Capacitance (CS(off), CD(off))	60pF 60pF
On-state Resistance Match-Nom	0.04Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	156ns, 87ns
Charge Injection	170pC
Channel-to-Channel Matching (ΔRon)	30m Ω
Crosstalk	-110dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	285ns
Switch-off Time-Max	159ns
Drain to Source Resistance	2.15Ohm
Normal Position	NC
Height	1.2mm
Length	5.1mm
Width	4.5mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1612BRUZ Overview

Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. High reliability is provided by advanced packaging method Tube. Multiplexers like this are mounted in the Surface Mount position. 1:1 is the ratio of multiplexer to demultiplexer circuits. Around -40°C~125°C TA is the extended operating temperature. 16 terminations have been made so far. This electronic part offers high-quality output due to its 1 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. A total of 16 pins are injected into the body of the electronic part. Unlike digital switches, these are based on SPST - NO switching circuits. ADG1612 can be used to search for analog multiplexer variants. As far as internal resistance is concerned, it has 1.1Ohm. For details about the functions of 16 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 16V. Dual, Single supply type digital switch with a low cost. In order for the electronic part to function properly, the lowest voltage should be 3.3V. The switch multiplexer may be damaged if it is exposed to voltage greater than 480μA. There is no problem with using dual supply voltage, but it should not exceed 8V. You should attach at least 3.3V voltage if you are using dual power supply. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. There are 4 inputs to be operated. The data can be transferred over a wide range of bandwidths, called 42MHz bandwidths. A Drain to Source resistance of 2.15Ohm is shown for this electronic part.