ADG1612BRUZ-REEL7
| Parameters | |
|---|---|
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Interface | Parallel |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 3.3V |
| Test Frequency | 1MHz |
| Operating Supply Current | 320μA |
| Power Dissipation | 5.8mW |
| Max Supply Current | 480μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 212 ns |
| Number of Inputs | 4 |
| Voltage - Supply, Single/Dual (±) | 3.3V~16V ±3.3V~8V |
| Supply Type | Dual, Single |
| Bandwidth | 38MHz |
| Turn-Off Delay Time | 137 ns |
| Max Dual Supply Voltage | 8V |
| On-State Resistance (Max) | 1.1Ohm |
| Min Dual Supply Voltage | 3.3V |
| Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 300pA |
| Channel Capacitance (CS(off), CD(off)) | 60pF 60pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 156ns, 87ns |
| Charge Injection | 170pC |
| Channel-to-Channel Matching (ΔRon) | 30m Ω |
| Crosstalk | -110dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 1.1Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 5.8mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG1612 |
ADG1612BRUZ-REEL7 Overview
This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. Multiplexer and demultiplexer circuits have a number 1:1. Increasing operating temperature to around -40°C~125°C TA. Total terminations are 16. A total of 16 pins are injected into the body of the electronic part. A SPST - NO switching circuit is used for these analog switches. Search with ADG1612 if you are looking for analog multiplexer variants. As far as internal resistance is concerned, it has 1.1Ohm. To find out what the 16 pins do, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In a normalsituation, users should not supply the switches with voltage higher than 16V. Analog switch ics with Dual, Single supply type are cost-effective. It is recommended that the electrical component receives a voltage of 3.3V. In order to operate this switch device, it would need a current of 320μA. It may damage the digital multiplexer if the voltage is higher than 480μA. Despite this switch's dual supply capability, its voltage should not exceed 8V. It is recommended that you attach at least 3.3V to your dual power supply. This analog switch ic utilizes SEPARATE OUTPUT output. Operating the 4 inputs requires 4 inputs. In 38MHz-bandwidths, data can be transferred.
ADG1612BRUZ-REEL7 Features
Switch Circuit: SPST - NO
320μA Supply Current
Bandwidth: 38MHz
ADG1612BRUZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG1612BRUZ-REEL7 Analog Switches & Multiplexers ICs applications.
- FTTH
- Medical
- Relay Replacement
- Battery Powered Systems
- CSU
- Communication systems
- Audio and video signal routing
- DSLAMs
- Transmit
- E1 Multiplexer
