ADG1613BCPZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 1.1Ohm |
| Terminal Finish | MATTE TIN |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 5.8mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 4 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADG1613 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3/12/+-5V |
| Interface | Parallel |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 3.3V |
| Test Frequency | 1MHz |
| Power Dissipation | 5.8mW |
| Max Supply Current | 480μA |
| Turn On Delay Time | 212 ns |
| Number of Inputs | 4 |
| Voltage - Supply, Single/Dual (±) | 3.3V~16V ±3.3V~8V |
| Supply Type | Dual, Single |
| Bandwidth | 38MHz |
| Turn-Off Delay Time | 137 ns |
| Max Dual Supply Voltage | 8V |
| On-State Resistance (Max) | 1.1Ohm |
| Min Dual Supply Voltage | 3.3V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 300pA |
| Channel Capacitance (CS(off), CD(off)) | 60pF 60pF |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 156ns, 87ns |
| Charge Injection | 170pC |
| Channel-to-Channel Matching (ΔRon) | 30m Ω |
| Crosstalk | -110dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG1613BCPZ-REEL Overview
This electronic part is conveniently packaged in 16-VQFN Exposed Pad, CSP, making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have the same number of circuits 1:1. Extended operating temperature around -40°C~125°C TA. Total terminations are 16. As part of the design of the 16 series, this electronic part has been incorporated into the system. Circuits based on SPST - NO/NC switching are used to construct these analog switch ics. Look for analog switch ic variants by searching with ADG1613. The internal resistance of this digital multiplexer is 1.1Ohm. Datasheets for 16 pin functions are available upon request. This switch device is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 16V. Dual, Single supply type digital switch with a low cost. It is recommended that the electrical component receives a voltage of 3.3V. The analogue multiplexer may be damaged if voltage is greater than 480μA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 8V. For dual power supplies, a voltage of at least 3.3V should be attached. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. A 4 input needs to be operated. 38MHz bandwidths enable data to be transferred.
ADG1613BCPZ-REEL Features
Switch Circuit: SPST - NO/NC
Bandwidth: 38MHz
ADG1613BCPZ-REEL Applications
There are a lot of Analog Devices Inc. ADG1613BCPZ-REEL Analog Switches & Multiplexers ICs applications.
- Fiber to the Home
- Imaging
- Cable PC
- Sample hold systems
- Ultrasound
- Cell phones
- Cellular phones
- Automotive applications
- SONET
- High speed data transmission line cards
