ADG1633BCPZ-REEL7

38ns, 152ns SPDT 4.5Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG1633 16 Pins 100pA 5V 16-WFQFN Exposed Pad, CSP

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1633BCPZ-REEL7
Package: 16-WFQFN Exposed Pad, CSP
Datasheet: PDF
Stock: 977
Description: 38ns, 152ns SPDT 4.5Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG1633 16 Pins 100pA 5V 16-WFQFN Exposed Pad, CSP(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Mounting Type	Surface Mount
Package / Case	16-WFQFN Exposed Pad, CSP
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	16
ECCN Code	EAR99
Resistance	4.5Ohm
Terminal Finish	MATTE TIN
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	225
Number of Functions	3
Supply Voltage	5V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	ADG1633
Pin Count	16
Number of Outputs	6
Qualification Status	Not Qualified
Number of Channels	1
Interface	Parallel
Max Supply Voltage	16V
Min Supply Voltage	3.3V
Test Frequency	1MHz
Power Dissipation	12nW
Max Supply Current	600μA
Turn On Delay Time	79 ns
Number of Inputs	3
Voltage - Supply, Single/Dual (±)	3.3V~16V ±3.3V~8V
Supply Type	Dual, Single
Bandwidth	109MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	199 ns
Max Dual Supply Voltage	8V
On-State Resistance (Max)	4.5Ohm
Min Dual Supply Voltage	3.3V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	64 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	19pF 32pF
On-state Resistance Match-Nom	0.12Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	38ns, 152ns
Charge Injection	-12.4pC
Channel-to-Channel Matching (ΔRon)	120m Ω
Crosstalk	-64dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	98ns
Switch-off Time-Max	259ns
Drain to Source Resistance	4.5Ohm
Height Seated (Max)	0.8mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1633BCPZ-REEL7 Overview

Packed in 16-WFQFN Exposed Pad, CSP, the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Surface Mount position. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Operational temperature extended around -40°C~125°C TA. A total of 16 terminations have been recorded. A high-quality output is provided by the electrical component's 1 channels. An 5V voltage supply should allow the electrical part to be turned on and run. A total of 16 pins are injected into the electrical part body. Circuits based on SPDT switching are used to construct these analog switch ics. Search with ADG1633 if you are looking for analog multiplexer variants. In this multiplexer, the internal resistance is 4.5Ohm. The functions of 16 pins can be found in the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. A voltage higher than 16V should not normally be supplied to the switches. Digital switch that provides Dual, Single power at a cost-effective price. The lowest voltage the electronic part should receive is 3.3V. Putting voltage greater than 600μA on the multiplexer may cause damage. For this multiplexer, dual supply voltage is feasible, but it should not exceed 8V. The voltage should be at least 3.3V if you are using dual power supplies. Operating 3 inputs is required. The data can be transferred over a wide range of bandwidths, called 109MHz bandwidths. Drain to Source resistance is 4.5Ohm. An output of 6 is provided by the digital multiplexer.