ADG1633BRUZ

38ns, 152ns SPDT 4.5Ohm Analog Switches BREAK-BEFORE-MAKE ADG1633 16 Pins 100pA 5V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1633BRUZ
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 466
Description: 38ns, 152ns SPDT 4.5Ohm Analog Switches BREAK-BEFORE-MAKE ADG1633 16 Pins 100pA 5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	4.5Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	3
Supply Voltage	5V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG1633
Pin Count	16
Number of Outputs	6
Qualification Status	Not Qualified
Number of Channels	1
Interface	Parallel
Max Supply Voltage	16V
Min Supply Voltage	3.3V
Test Frequency	1MHz
Power Dissipation	12nW
Max Supply Current	480μA
Turn On Delay Time	79 ns
Number of Inputs	3
Voltage - Supply, Single/Dual (±)	3.3V~16V ±3.3V~8V
Supply Type	Dual, Single
Bandwidth	117MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	199 ns
Max Dual Supply Voltage	8V
-3db Bandwidth	109MHz
On-State Resistance (Max)	4.5Ohm
Min Dual Supply Voltage	3.3V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	64 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	19pF 32pF
On-state Resistance Match-Nom	0.12Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	38ns, 152ns
Charge Injection	-12.4pC
Channel-to-Channel Matching (ΔRon)	120m Ω
Crosstalk	-64dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	98ns
Switch-off Time-Max	259ns
Drain to Source Resistance	4.5Ohm
Height	1.05mm
Length	5.1mm
Width	4.5mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1633BRUZ Overview

Presented in 16-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tube. Multiplexers like this are mounted in the Surface Mount position. Multiplexer and demultiplexer circuits have a number 2:1. Operating temperature extended to -40°C~125°C TA. A total of 16 terminations have been recorded. The electronic part delivers high-quality output through its 1 channels. It is safe to turn on and run the electronic component with a 5V voltage supply. This electrical component is included in the 16 series of products. A SPDT switching circuit is used to build these analog multiplexers. If you are looking for variants of the digital switch, trying search with ADG1633. There is 4.5Ohm internal resistance in this digital multiplexer. The functions of 16 pins can be found in the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 16V in normal situations. An effective Dual, Single supply digital multiplexer. 3.3V is the lowest voltage that should be fed to the electronic electronic part. A voltage higher than 480μA may cause damage to the switch multiplexer. Despite this switch device's dual supply capability, its voltage should not exceed 8V. If you are using dual power supplies, you should attach at least 3.3V. Among the inputs that can be operated are the 3 inputs. This switch operates within the bandwidth of 117MHz. Drain to Source resistance for this electronic component is 4.5Ohm. There are 6 outputs on the analogue multiplexer.