Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
20-VFQFN Exposed Pad, CSP |
Surface Mount |
YES |
Number of Pins |
20 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Resistance |
5Ohm |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADG1634 |
Pin Count |
20 |
Number of Outputs |
8 |
Qualification Status |
Not Qualified |
Polarity |
Non-Inverting |
Number of Channels |
1 |
Interface |
Parallel |
Max Supply Voltage |
16V |
Min Supply Voltage |
3.3V |
Test Frequency |
1MHz |
Power Dissipation |
12nW |
Max Supply Current |
600μA |
Turn On Delay Time |
79 ns |
Number of Inputs |
4 |
Voltage - Supply, Single/Dual (±) |
3.3V~16V ±3.3V~8V |
Supply Type |
Dual, Single |
Bandwidth |
103MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Turn-Off Delay Time |
199 ns |
Max Dual Supply Voltage |
8V |
-3db Bandwidth |
109MHz |
On-State Resistance (Max) |
4.5Ohm |
Min Dual Supply Voltage |
3.3V |
High Level Output Current |
206mA |
Dual Supply Voltage |
5V |
Low Level Output Current |
206mA |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
64 dB |
Current - Leakage (IS(off)) (Max) |
100pA |
Channel Capacitance (CS(off), CD(off)) |
19pF 32pF |
On-state Resistance Match-Nom |
0.12Ohm |
Switch Circuit |
SPDT |
Switch Time (Ton, Toff) (Max) |
38ns, 152ns |
Charge Injection |
-12.4pC |
Channel-to-Channel Matching (ΔRon) |
120m Ω |
Crosstalk |
-64dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-off Time-Max |
259ns |
Drain to Source Resistance |
10Ohm |
Height Seated (Max) |
1mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG1634BCPZ-REEL7 Overview
The electronic component is convenient to ship overseas because it is packed in a 20-VFQFN Exposed Pad, CSP. The advanced packaging method Tape & Reel (TR) provides high reliability. In Surface Mount, you'll find this switch device. 2:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -40°C~125°C TA. In total, there are 20 terminations. A high-quality output is provided by the electrical component's 1 channels. When the electronic component is given a voltage of 5V, it should be turned on and run. The electrical component body receives 20 pins. Unlike digital switches, these are based on SPDT switching circuits. ADG1634 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 5Ohm. The functions of 20 pins can be found in the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 16V to the switch device in normal circumstances. The digital multiplexer has a low cost Dual, Single supply. In order for the electronic part to function properly, the lowest voltage should be 3.3V. Putting voltage greater than 600μA on the multiplexer may cause damage. If put voltage greater than 8V on the multiplexer, damage may be caused to the device. It is recommended that you attach at least 3.3V to your dual power supply. Operating the 4 inputs requires 4 inputs. The transfer of data can be performed over 103MHz bandwidths. Drain to Source resistance for this electronic component is 10Ohm. 8 outputs are included in the analogue multiplexer.
ADG1634BCPZ-REEL7 Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 109MHz
Bandwidth: 103MHz
Drain-to-Source resistance: 10Ohm
ADG1634BCPZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG1634BCPZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Relay Replacement
- Remote wireless modules
- Access Concentrators
- Communication systems
- Automotive applications
- Digital cross connects (DSX-1)
- Audio and video routing
- Sample-and-hold systems
- Fiber to the Home
- PBX interfaces