ADG201AKNZ
| Parameters | |
|---|---|
| Max Supply Voltage | 25V |
| Operating Supply Current | 600μA |
| Power Dissipation | 33mW |
| Max Supply Current | 2mA |
| Throw Configuration | SPST |
| Turn On Delay Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 10V~15V ±10V~15V |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 250 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 90Ohm |
| High Level Output Current | 30mA |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 80 dB |
| Current - Leakage (IS(off)) (Max) | 2nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 300ns, 250ns |
| Charge Injection | 20pC |
| Channel-to-Channel Matching (ΔRon) | 4.5 Ω |
| Crosstalk | -80dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Drain to Source Resistance | 60mOhm |
| Normal Position | NC |
| Height | 3.3mm |
| Length | 20.07mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 90Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | ADG201 |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Polarity | Inverting, Non-Inverting |
| Number of Channels | 4 |
| Interface | Parallel |
ADG201AKNZ Overview
As the electronic part is packed in 16-DIP (0.300, 7.62mm), international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tube. Multiplexers like this are mounted in the Through Hole position. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operation at a temperature around -40°C~85°C TA. Totally, there are 16 terminations. High-quality output is provided by the electronic component's 4 channels. A 15V voltage supply should turn on and run the electronic component. An injection of 16 pins is performed into the body of the electrical component. Multiplexers built on a SPST - NC switching circuit are built. Try searching with ADG201 if you're looking for variants. Internally, this switch multiplexer has a resistance of 90Ohm. Datasheets for functions of 16 pins are available. It is a typical Multiplexer or Switches analog multiplexer. Users should never supply a voltage higher than 25V to a switch device. Analogue multiplexer with a Dual supply type that is cost-effective. It would be sufficient to run this analogue multiplexer with 600μA current. When the digital multiplexer is charged above 2mA, damage can occur. If put voltage greater than 22V on the multiplexer, damage may be caused to the device. 15V operating voltages can be used with this electrical part. Drain to Source resistance is 60mOhm.
ADG201AKNZ Features
4 Channels
Switch Circuit: SPST - NC
600μA Supply Current
Drain-to-Source resistance: 60mOhm
ADG201AKNZ Applications
There are a lot of Analog Devices Inc. ADG201AKNZ Analog Switches & Multiplexers ICs applications.
- HDTV
- Sample hold systems
- Communications systems
- Automatic test equipment
- High-Voltage
- Remote Powered Equipment
- Fiber to the Home
- Automotive applications
- Power routing
- Cell phones
