Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 months ago) |
Mounting Type |
Surface Mount |
Package / Case |
20-LCC (J-Lead) |
Surface Mount |
YES |
Number of Pins |
20 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Resistance |
90Ohm |
Terminal Finish |
Matte Tin (Sn) |
Max Power Dissipation |
33mW |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
J BEND |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
15V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADG201 |
Pin Count |
20 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
15V |
Number of Channels |
4 |
Interface |
Parallel |
Max Supply Voltage |
25V |
Power Dissipation |
33mW |
Max Supply Current |
2mA |
Throw Configuration |
SPST |
Turn On Delay Time |
300 ns |
Voltage - Supply, Single/Dual (±) |
10V~15V ±10V~15V |
Supply Type |
Dual |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
250 ns |
Max Dual Supply Voltage |
22V |
On-State Resistance (Max) |
90Ohm |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
80 dB |
Current - Leakage (IS(off)) (Max) |
2nA |
Channel Capacitance (CS(off), CD(off)) |
5pF |
On-state Resistance Match-Nom |
5Ohm |
Switch Circuit |
SPST - NC |
Switch Time (Ton, Toff) (Max) |
300ns, 250ns |
Charge Injection |
20pC |
Channel-to-Channel Matching (ΔRon) |
4.5 Ω |
Crosstalk |
-80dB @ 100kHz |
Height |
3.68mm |
Length |
9.04mm |
Width |
9.04mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG201AKPZ Overview
Shipping overseas is convenient due to the electrical component's packing in 20-LCC (J-Lead). In order to provide high reliability, an advanced packaging method Tube is used. There is an analog multiplexer mounted in position Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Operation at a temperature around -40°C~85°C TA. Total terminations are 20. As a result of its 4 channels, this electronic component provides high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. 20 pins are injected to the electronic part body. SPST - NC switching circuits are used in these analog switch ics. ADG201 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 90Ohm. The datasheets for the 20 pins explain the functions. It is generally not recommended to supply a voltage higher than 25V to the switch device in normal circumstances. A analog switch ic that has a cost-effective Dual supply type. The switch multiplexer may be damaged if it is exposed to voltage greater than 2mA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 22V. There is a voltage range of 15V operating voltages for the electrical part.
ADG201AKPZ Features
4 Channels
Switch Circuit: SPST - NC
ADG201AKPZ Applications
There are a lot of Analog Devices Inc. ADG201AKPZ Analog Switches & Multiplexers ICs applications.
- ISDN NT1/TA
- Imaging
- Avionics and Military Systems
- Public switching systems
- DSUs
- Channel Banks
- Relay replacements
- Cellular phones
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Medical Instrumentation