ADG201AKPZ-REEL
| Parameters | |
|---|---|
| Operating Supply Current | 600μA |
| Power Dissipation | 33mW |
| Max Supply Current | 2mA |
| Throw Configuration | SPST |
| Turn On Delay Time | 300 ns |
| Number of Inputs | 4 |
| Voltage - Supply, Single/Dual (±) | 10V~15V ±10V~15V |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 250 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 90Ohm |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 80 dB |
| Current - Leakage (IS(off)) (Max) | 2nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 300ns, 250ns |
| Charge Injection | 20pC |
| Channel-to-Channel Matching (ΔRon) | 4.5 Ω |
| Crosstalk | -80dB @ 100kHz |
| Length | 8.966mm |
| Width | 8.966mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 90Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 33mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADG201 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 15V |
| Number of Channels | 1 |
| Interface | Parallel |
| Max Supply Voltage | 25V |
ADG201AKPZ-REEL Overview
Presented in 20-LCC (J-Lead), this electrical component is convenient for overseas shipping. High reliability is provided by advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. Increasing operating temperature to around -40°C~85°C TA. In total, 20 terminations have occurred. The electronic part delivers high-quality output through its 1 channels. With a 15V voltage supply, the electrical component should be turned on and run. The electrical component body receives 20 pins. Based on SPST - NC switching circuits, these analog multiplexers work. Try searching for ADG201 variants of the analog switch ic. The internal resistance of this digital multiplexer is 90Ohm. To find out what the 20 pins do, please refer to the datasheets. normally, users should not supply switches with voltages higher than 25V. Digital switch that provides Dual power at a cost-effective price. It would be sufficient to run this analogue multiplexer with 600μA current. Put voltage above 2mA on the multiplexer to cause damage. Despite this switch device's dual supply capability, its voltage should not exceed 22V. The electronic component can function from 15V. The 4 inputs need to be operated in order to work.
ADG201AKPZ-REEL Features
1 Channels
Switch Circuit: SPST - NC
600μA Supply Current
ADG201AKPZ-REEL Applications
There are a lot of Analog Devices Inc. ADG201AKPZ-REEL Analog Switches & Multiplexers ICs applications.
- Multi-Line E1 Interface Cards
- MP3 players
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Sample hold systems
- Intelligent PBX
- PBX interfaces
- Low-Voltage
- Ultrasound
- Mechanical reed relay replacement
- Sample-and-hold systems
