ADG201AKRZ
| Parameters | |
|---|---|
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 90Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 33mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG201 |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Polarity | Non-Inverting |
| Number of Channels | 4 |
| Interface | Parallel |
| Max Supply Voltage | 25V |
| Power Dissipation | 33mW |
| Max Supply Current | 2mA |
| Throw Configuration | SPST |
| Turn On Delay Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 10V~15V ±10V~15V |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 250 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 90Ohm |
| High Level Output Current | 30mA |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 80 dB |
| Current - Leakage (IS(off)) (Max) | 2nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 300ns, 250ns |
| Charge Injection | 20pC |
| Channel-to-Channel Matching (ΔRon) | 4.5 Ω |
| Crosstalk | -80dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Drain to Source Resistance | 60Ohm |
| Normal Position | NC |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
ADG201AKRZ Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Tube is used. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. Operation at a temperature around -40°C~85°C TA. In total, 16 terminations have occurred. As a result of its 4 channels, this electronic component provides high-quality output. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. 16 pins are injected to the electronic part body. Based on SPST - NC switching circuits, these analog multiplexers work. Try searching for the analog switch ic with ADG201 if you are looking for variants. The internal resistance of this digital multiplexer is 90Ohm. You can find the functions of the 16 pins in the datasheets. Multiplexer or Switches is a typical switch device. In normalcircumstances, users should not exceed 25V volts for the multiplexer. Analogue multiplexers of the Dual supply type that are cost-effective. If you put voltage higher than 2mA on the digital multiplexer, damage may occur. Despite this switch's dual supply capability, its voltage should not exceed 22V. 15V operating voltages can be used with this electrical part. Resistivity from Drain to Source is 60Ohm for this electronic part.
ADG201AKRZ Features
4 Channels
Switch Circuit: SPST - NC
Drain-to-Source resistance: 60Ohm
ADG201AKRZ Applications
There are a lot of Analog Devices Inc. ADG201AKRZ Analog Switches & Multiplexers ICs applications.
- Automotive applications
- Fiber to the Home
- Video switching
- DVD-R
- ATM
- Relay replacements
- Medical
- E1 Multiplexer
- Medical systems
- Routers
