Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 months ago) |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
90Ohm |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
33mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
15V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG201 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
15V |
Number of Channels |
4 |
Interface |
Parallel |
Max Supply Voltage |
25V |
Operating Supply Current |
600μA |
Power Dissipation |
33mW |
Max Supply Current |
2mA |
Throw Configuration |
SPST |
Turn On Delay Time |
300 ns |
Voltage - Supply, Single/Dual (±) |
10V~15V ±10V~15V |
Supply Type |
Dual |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
250 ns |
Max Dual Supply Voltage |
22V |
On-State Resistance (Max) |
90Ohm |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
80 dB |
Current - Leakage (IS(off)) (Max) |
2nA |
Channel Capacitance (CS(off), CD(off)) |
5pF |
On-state Resistance Match-Nom |
5Ohm |
Switch Circuit |
SPST - NC |
Switch Time (Ton, Toff) (Max) |
300ns, 250ns |
Charge Injection |
20pC |
Channel-to-Channel Matching (ΔRon) |
4.5 Ω |
Crosstalk |
-80dB @ 100kHz |
Switching |
BREAK-BEFORE-MAKE |
Normal Position |
NC |
Height Seated (Max) |
1.75mm |
Length |
9.9mm |
Width |
3.9mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG201AKRZ-REEL Overview
The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). A switch device like this is mounted in Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. Extended operating temperature around -40°C~85°C TA. In total, there are 16 terminations. A high-quality output is provided by the electrical component's 4 channels. An 15V voltage supply should allow the electrical part to be turned on and run. There is an electrical component included in the 16 series. Based on SPST - NC switching circuits, these analog multiplexers work. Try searching with ADG201 to find analog multiplexer variants. In this multiplexer, the internal resistance is 90Ohm. Please refer to the datasheets for 16 pins functions. Multiplexer or Switches is a typical switch device. A voltage higher than 25V should not normally be supplied to the switches. Analog switch ics with Dual supply type are cost-effective. In order to operate this switch device, it would need a current of 600μA. When the digital multiplexer is charged above 2mA, damage can occur. If put voltage greater than 22V on the multiplexer, damage may be caused to the device. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. This electrical part is compatible with 15V operating voltages.
ADG201AKRZ-REEL Features
4 Channels
Switch Circuit: SPST - NC
600μA Supply Current
ADG201AKRZ-REEL Applications
There are a lot of Analog Devices Inc. ADG201AKRZ-REEL Analog Switches & Multiplexers ICs applications.
- Low-Voltage
- PCMCIA cards
- Modems
- Digital access cross connects
- Fault Tolerant Systems
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- DSUs
- Communication systems
- MP3 players
- Remote wireless modules