Parameters |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
90Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
33mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
15V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG201 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
15V |
Number of Channels |
1 |
Interface |
Parallel |
Max Supply Voltage |
25V |
Operating Supply Current |
600μA |
Power Dissipation |
33mW |
Max Supply Current |
2mA |
Throw Configuration |
SPST |
Turn On Delay Time |
300 ns |
Number of Inputs |
4 |
Voltage - Supply, Single/Dual (±) |
10V~15V ±10V~15V |
Supply Type |
Dual |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
250 ns |
Max Dual Supply Voltage |
22V |
On-State Resistance (Max) |
90Ohm |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
80 dB |
Current - Leakage (IS(off)) (Max) |
2nA |
Channel Capacitance (CS(off), CD(off)) |
5pF |
On-state Resistance Match-Nom |
4.5Ohm |
Switch Circuit |
SPST - NC |
Switch Time (Ton, Toff) (Max) |
300ns, 250ns |
Charge Injection |
20pC |
Channel-to-Channel Matching (ΔRon) |
4.5 Ω |
Crosstalk |
-80dB @ 100kHz |
Switching |
BREAK-BEFORE-MAKE |
Normal Position |
NC |
Height Seated (Max) |
1.75mm |
Length |
9.9mm |
Width |
3.9mm |
ADG201ASRZ-EP-RL7 Overview
Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. The advanced packaging method Tape & Reel (TR) provides high reliability. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 1:1. Operation at a temperature around -55°C~125°C TA. 16 terminations have been made so far. A electrical component with 1 channels is capable of high-quality output. A 15V voltage supply should turn on and run the electronic component. It is part of the design of the 16 series that this electronic component is included. A SPST - NC switching circuit is used to build these analog multiplexers. Using the ADG201 search parameter, you can discover variants of the switch. Internally, this switch multiplexer has a resistance of 90Ohm. Datasheets for 16 pin functions are available upon request. This switch device is a typical Multiplexer or Switches. Users shouldn't supply more than 25V voltage to the switch device. Analog switch ics with Dual supply type are cost-effective. It would be sufficient to run this analogue multiplexer with 600μA current. Put voltage above 2mA on the multiplexer to cause damage. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 22V. This analog switch ic utilizes SEPARATE OUTPUT output. There is a voltage range of 15V operating voltages for the electrical part. Operating 4 inputs is required.
ADG201ASRZ-EP-RL7 Features
1 Channels
Switch Circuit: SPST - NC
600μA Supply Current
ADG201ASRZ-EP-RL7 Applications
There are a lot of Analog Devices Inc. ADG201ASRZ-EP-RL7 Analog Switches & Multiplexers ICs applications.
- Fiber to the Home
- Medical
- SONET/SDH ADM
- Audio and video switching
- Signal routing between systems
- Automatic test equipment
- Video signal routing
- PCMCIA cards
- Battery Powered Systems
- Cell phones