Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 month ago) |
Contact Plating |
Tin |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
16-DIP (0.300, 7.62mm) |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
50Ohm |
Max Power Dissipation |
470mW |
Technology |
CMOS |
Number of Functions |
4 |
Supply Voltage |
15V |
Base Part Number |
ADG201 |
Pin Count |
16 |
Polarity |
Inverting, Non-Inverting |
Number of Channels |
4 |
Interface |
Parallel |
Max Supply Voltage |
16.5V |
Min Supply Voltage |
10.8V |
Power Dissipation |
240mW |
Max Supply Current |
10mA |
Throw Configuration |
SPST |
Turn On Delay Time |
50 ns |
Voltage - Supply, Single/Dual (±) |
10.8V~16.5V ±13.5V~16.5V |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
50 ns |
Max Dual Supply Voltage |
16.5V |
On-State Resistance (Max) |
50Ohm |
Min Dual Supply Voltage |
10.8V |
High Level Output Current |
20mA |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
72 dB |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
10pF 10pF |
On-state Resistance Match-Nom |
3Ohm |
Switch Circuit |
SPST - NC |
Switch Time (Ton, Toff) (Max) |
75ns, 75ns |
Charge Injection |
10pC |
Channel-to-Channel Matching (ΔRon) |
1.5 Ω |
Crosstalk |
-86dB @ 100kHz |
Switch-on Time-Max |
75ns |
Switch-off Time-Max |
75ns |
Drain to Source Resistance |
30Ohm |
Height |
3.3mm |
Length |
20.07mm |
Width |
6.35mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG201HSJNZ Overview
The electrical component comes in 16-DIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. High reliability is ensured by the advanced packaging method Tube. Through Hole is where this multiplexer is located. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature extended to -40°C~85°C TA. In total, 16 terminations have occurred. A 4 channel electronic part produces high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. There is an electrical component included in the 16 series. Based on SPST - NC switching circuits, these analog multiplexers work. Try searching for the analog switch ic with ADG201 if you are looking for variants. This digital multiplexer has 50Ohm internal resistance. To find out what the functions of 16 pins are, please refer to their datasheets. It is generally not recommended to supply a voltage higher than 16.5V to the switch device in normal circumstances. Analogue multiplexers of the Dual, Single supply type that are cost-effective. There should be 10.8V voltage fed to the electrical part below 10.8V. When the digital multiplexer is charged above 10mA, damage can occur. Despite this switch device's dual supply capability, its voltage should not exceed 16.5V. The voltage should be at least 10.8V if you are using dual power supplies. This electronic component presents a Drain to Source resistance of 30Ohm.
ADG201HSJNZ Features
4 Channels
Switch Circuit: SPST - NC
Drain-to-Source resistance: 30Ohm
ADG201HSJNZ Applications
There are a lot of Analog Devices Inc. ADG201HSJNZ Analog Switches & Multiplexers ICs applications.
- Battery Powered Systems
- Modems
- Industrial control systems
- Public switching systems
- Remote wireless modules
- Battery-powered systems
- SONET/SDH ADM
- Communication systems
- Switching Systems
- Channel Banks