ADG201HSJP

75ns, 75ns SPST - NC 50Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG201 20 Pins 1nA 15V 20-LCC (J-Lead)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG201HSJP
Package: 20-LCC (J-Lead)
Datasheet: PDF
Stock: 360
Description: 75ns, 75ns SPST - NC 50Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG201 20 Pins 1nA 15V 20-LCC (J-Lead)(Kg)

Details

Tags

Parameters
Mounting Type	Surface Mount
Package / Case	20-LCC (J-Lead)
Surface Mount	YES
Number of Pins	20
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
ECCN Code	EAR99
Resistance	50Ohm
Terminal Finish	Tin/Lead (Sn85Pb15)
Additional Feature	CAN ALSO OPERATE WITH SINGLE 10.8 TO 16.5 SUPPLY RANGE
Subcategory	Multiplexer or Switches
Max Power Dissipation	240mW
Technology	CMOS
Terminal Position	QUAD
Terminal Form	J BEND
Peak Reflow Temperature (Cel)	225
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG201
Output	SEPARATE OUTPUT
Pin Count	20
Number of Channels	4
Max Supply Voltage	16.5V
Min Supply Voltage	10.8V
Power Dissipation	240mW
Max Supply Current	10mA
Throw Configuration	SPST
Turn On Delay Time	50 ns
Voltage - Supply, Single/Dual (±)	10.8V~16.5V ±13.5V~16.5V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	50 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	50Ohm
Min Dual Supply Voltage	10.8V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	72 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	10pF 10pF
On-state Resistance Match-Nom	3Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	75ns, 75ns
Charge Injection	10pC
Channel-to-Channel Matching (ΔRon)	1.5 Ω
Crosstalk	-86dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	75ns
Switch-off Time-Max	75ns
Normal Position	NC
Length	8.965mm
Width	8.965mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

ADG201HSJP Overview

As the electronic part is packed in 20-LCC (J-Lead), international shipping is convenient. This packaging method provides high reliability because it uses advanced packaging techniques. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. Operating temperature around -40°C~85°C TA extended. Total terminations are 20. A 4 channel electronic part produces high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. The electrical component body receives 20 pins. On the other hand, analog switches can be constructed using SPST - NC switching circuits. If you are looking for variants of the digital switch, trying search with ADG201. In this multiplexer, the internal resistance is 50Ohm. For details about the functions of 20 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. Users shouldn't supply more than 16.5V voltage to the switch device. The digital multiplexer has a low cost Dual, Single supply. It is recommended to use 10.8V as the lowest voltage for the electrical part. Put voltage above 10mA on the multiplexer to cause damage. If put voltage greater than 16.5V on the multiplexer, damage may be caused to the device. In the case of dual power supplies, you should connect at least 10.8V. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. This electrical component also includes additional features such as CAN ALSO OPERATE WITH SINGLE 10.8 TO 16.5 SUPPLY RANGE.