ADG201HSKN
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 50Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADG201 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | +-15V |
| Number of Channels | 4 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 10.8V |
| Power Dissipation | 470mW |
| Throw Configuration | SPST |
| Voltage - Supply, Single/Dual (±) | 10.8V~16.5V ±13.5V~16.5V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 16.5V |
| On-State Resistance (Max) | 50Ohm |
| Min Dual Supply Voltage | 10.8V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 10pF |
| On-state Resistance Match-Nom | 3Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 50ns, 50ns |
| Charge Injection | 10pC |
| Channel-to-Channel Matching (ΔRon) | 1.5 Ω |
| Crosstalk | -86dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 50ns |
| Switch-off Time-Max | 50ns |
| Normal Position | NC |
| Length | 19.055mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
ADG201HSKN Overview
Shipping overseas is convenient due to the electrical component's packing in 16-DIP (0.300, 7.62mm). High reliability is ensured by the advanced packaging method Tube. There is an analog multiplexer mounted in position Through Hole. Multiplexer and demultiplexer circuits have a number 1:1. Temperatures around -40°C~85°C TA are extended for operation. A total of 16 terminations have been recorded. A 4 channel electronic part produces high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. As part of its design, the 16 series is equipped with this electronic component. Based on SPST - NC switching circuits, these analog multiplexers work. Try searching for the analog switch ic with ADG201 if you are looking for variants. A 50Ohm internal resistance characterizes this multiplexer. To find out what the 16 pins do, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 16.5V. The lowest voltage fed to the electronic component should be 10.8V. For this switch, a dual supply voltage is feasible, but it must not exceed 16.5VIn the case of dual power supplies, you should connect at least 10.8V. The outputs of this digital multiplexer are SEPARATE OUTPUT in number.
ADG201HSKN Features
4 Channels
Switch Circuit: SPST - NC
ADG201HSKN Applications
There are a lot of Analog Devices Inc. ADG201HSKN Analog Switches & Multiplexers ICs applications.
- SONET/SDH ADM
- Communications systems
- Audio and video switching
- Multi-Line E1 Interface Cards
- Video switching
- Multiplexers
- Precision data acquisition
- Microprocessor Controlled Analog Systems
- MP3 players
- FTTH
