Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 months ago) |
Mounting Type |
Through Hole |
Package / Case |
16-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
50Ohm |
Terminal Finish |
Matte Tin (Sn) |
Max Power Dissipation |
240mW |
Technology |
CMOS |
Number of Functions |
4 |
Supply Voltage |
15V |
Base Part Number |
ADG201 |
Pin Count |
16 |
Number of Channels |
4 |
Interface |
Parallel |
Max Supply Voltage |
16.5V |
Min Supply Voltage |
10.8V |
Power Dissipation |
240mW |
Max Supply Current |
10mA |
Throw Configuration |
SPST |
Turn On Delay Time |
50 ns |
Voltage - Supply, Single/Dual (±) |
10.8V~16.5V ±13.5V~16.5V |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
50 ns |
Max Dual Supply Voltage |
16.5V |
On-State Resistance (Max) |
50Ohm |
Min Dual Supply Voltage |
10.8V |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
72 dB |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
10pF 10pF |
On-state Resistance Match-Nom |
3Ohm |
Switch Circuit |
SPST - NC |
Switch Time (Ton, Toff) (Max) |
50ns, 50ns |
Charge Injection |
10pC |
Channel-to-Channel Matching (ΔRon) |
1.5 Ω |
Crosstalk |
-86dB @ 100kHz |
Drain to Source Resistance |
50Ohm |
Height |
4.32mm |
Length |
19.81mm |
Width |
6.61mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG201HSKNZ Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-DIP (0.300, 7.62mm). The advanced packaging method Tube provides high reliability. The multiplexer is located in Through Hole. 1:1 is the ratio between multiplexers and demultiplexers. Increasing operating temperature to around -40°C~85°C TA. In total, there are 16 terminations. A electrical component with 4 channels is capable of high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. 16 pins are injected to the electronic part body. Unlike digital switches, these are based on SPST - NC switching circuits. Look for analog switch ic variants by searching with ADG201. Analog switches have 50Ohm internal resistance. To find out what the functions of 16 pins are, please refer to their datasheets. Users shouldn't supply more than 16.5V voltage to the switch device. Digital switch that provides Dual, Single power at a cost-effective price. 10.8V is the lowest voltage the electrical component should receive. If put voltage greater than 10mA on the device, damage may be caused to the analogue multiplexer. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 16.5V. When using dual power supplies, you should attach at least 10.8V. Drain to Source resistance is 50Ohm.
ADG201HSKNZ Features
4 Channels
Switch Circuit: SPST - NC
Drain-to-Source resistance: 50Ohm
ADG201HSKNZ Applications
There are a lot of Analog Devices Inc. ADG201HSKNZ Analog Switches & Multiplexers ICs applications.
- High-Voltage
- Battery Powered Instruments
- Medical Instrumentation
- SONET
- Medical systems
- Data switching
- Audio signal routing
- Digital Cross-Connects
- Precision instrumentation
- Digital cross connects (DSX-1)