ADG201HSKRZ-REEL
| Parameters | |
|---|---|
| Polarity | Non-Inverting |
| Number of Channels | 4 |
| Interface | Parallel |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 10.8V |
| Operating Supply Current | 10mA |
| Power Dissipation | 240mW |
| Max Supply Current | 10mA |
| Throw Configuration | SPST |
| Turn On Delay Time | 50 ns |
| Voltage - Supply, Single/Dual (±) | 10.8V~16.5V ±13.5V~16.5V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 50 ns |
| Max Dual Supply Voltage | 16.5V |
| On-State Resistance (Max) | 50Ohm |
| Min Dual Supply Voltage | 10.8V |
| High Level Output Current | 20mA |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 10pF |
| On-state Resistance Match-Nom | 3Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 50ns, 50ns |
| Charge Injection | 10pC |
| Channel-to-Channel Matching (ΔRon) | 1.5 Ω |
| Crosstalk | -86dB @ 100kHz |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 50Ohm |
| Max Power Dissipation | 240mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG201 |
| Pin Count | 16 |
ADG201HSKRZ-REEL Overview
The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. High reliability is achieved by using advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Extended operating temperature around -40°C~85°C TA. There are 16 terminations totally. The electronic part delivers high-quality output through its 4 channels. With a 15V voltage supply, the electrical component should be turned on and run. An electrical component like this is included in the 16 series. These analog multiplexers are built based on SPST - NC switching circuits. Search with ADG201 if you are looking for analog multiplexer variants. As far as internal resistance is concerned, it has 50Ohm. Datasheets for 16 pin functions are available upon request. In a normalsituation, users should not supply the switches with voltage higher than 16.5V. An effective Dual, Single supply digital multiplexer. 10.8V is the lowest voltage the electrical component should receive. The switch device would be able to operate with 10mA current. A digital multiplexer may suffer damage if voltage is applied above 10mA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 16.5V. If you are using dual power supplies, you should attach at least 10.8V.
ADG201HSKRZ-REEL Features
4 Channels
Switch Circuit: SPST - NC
10mA Supply Current
ADG201HSKRZ-REEL Applications
There are a lot of Analog Devices Inc. ADG201HSKRZ-REEL Analog Switches & Multiplexers ICs applications.
- Fiber to the Home
- PDH Multiplexers
- Multiplexers
- Power routing
- Transmit
- ISDN NT1/TA
- Precision test equipment
- Voice over IP/DSL – Integrated Access Devices, Smart
- 65 V DACs
- Switching Systems
