ADG202AKRZ-REEL

300ns, 250ns SPST - NO 90Ohm Analog Switches BREAK-BEFORE-MAKE ADG202 16 Pins 2nA 15V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG202AKRZ-REEL
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 385
Description: 300ns, 250ns SPST - NO 90Ohm Analog Switches BREAK-BEFORE-MAKE ADG202 16 Pins 2nA 15V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 3 months ago)
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	90Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	33mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG202
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Operating Supply Voltage	15V
Number of Channels	4
Interface	Parallel
Max Supply Voltage	25V
Operating Supply Current	600μA
Power Dissipation	33mW
Max Supply Current	2mA
Throw Configuration	SPST
Turn On Delay Time	300 ns
Voltage - Supply, Single/Dual (±)	10V~15V ±10V~15V
Supply Type	Dual
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	250 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	90Ohm
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	80 dB
Current - Leakage (IS(off)) (Max)	2nA
Channel Capacitance (CS(off), CD(off))	5pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	300ns, 250ns
Charge Injection	20pC
Channel-to-Channel Matching (ΔRon)	4.5 Ω
Crosstalk	-80dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Normal Position	NO
Height Seated (Max)	1.75mm
Length	9.9mm
Width	3.9mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG202AKRZ-REEL Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. The multiplexer is located in Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operating temperature around -40°C~85°C TA extended. A total of 16 terminations have been recorded. High-quality output is provided by the electronic component's 4 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. A total of 16 pins are injected into the body of the electronic part. Unlike digital switches, these are based on SPST - NO switching circuits. Try searching with ADG202 if you're looking for variants. It has an internal resistance of 90Ohm. Datasheets for functions of 16 pins are available. The analogue multiplexer in this example is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 25V to the switch device in normal circumstances. Analog switch ics with Dual supply type are cost-effective. An operating current of 600μA would be sufficient for this switch device. If put voltage greater than 2mA on the device, damage may be caused to the analogue multiplexer. For this switch, a dual supply voltage is feasible, but it must not exceed 22VSEPARATE OUTPUT outputs are utilized by this digital multiplexer. Operating voltages of 15V are compatible with the electrical part.