ADG202ATQ
| Parameters | |
|---|---|
| Qualification Status | Not Qualified |
| Power Supplies | +-15V |
| Number of Channels | 4 |
| Max Supply Voltage | 25V |
| Power Dissipation | 470mW |
| Throw Configuration | SPST |
| Voltage - Supply, Single/Dual (±) | 10V~15V ±10V~15V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 90Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 80 dB |
| Current - Leakage (IS(off)) (Max) | 2nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 300ns, 250ns |
| Charge Injection | 20pC |
| Channel-to-Channel Matching (ΔRon) | 4.5 Ω |
| Crosstalk | -80dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 300ns |
| Switch-off Time-Max | 250ns |
| Normal Position | NO |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Through Hole |
| Package / Case | 16-CDIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 90Ohm |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADG202 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
ADG202ATQ Overview
This electronic part is conveniently packaged in 16-CDIP (0.300, 7.62mm), making it easy to ship abroad. A high level of reliability can be achieved through the use of an advanced packaging method Tube. Through Hole is where this multiplexer is located. Multiplexers and demultiplexers have a number of circuits 1:1. Around -55°C~125°C TA is the extended operating temperature. The total number of terminations is 16. A 4 channel electronic part produces high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. Into the electrical component body are injected 16 pins. A SPST - NO switching circuit is used to build these analog multiplexers. If you are looking for variants of the digital switch, trying search with ADG202. The internal resistance of this digital multiplexer is 90Ohm. To find out what the 16 pins do, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. normally, users should not supply switches with voltages higher than 25V. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 22V. The outputs of this digital multiplexer are SEPARATE OUTPUT in number.
ADG202ATQ Features
4 Channels
Switch Circuit: SPST - NO
ADG202ATQ Applications
There are a lot of Analog Devices Inc. ADG202ATQ Analog Switches & Multiplexers ICs applications.
- Video switching
- Central office
- ATM
- Transmit
- PDAs
- Precision instrumentation
- DSUs
- Access Concentrators
- RGB switches
- Sample-and-hold systems
