ADG211AKP
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 20 |
| JESD-30 Code | S-PQCC-J20 |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Voltage - Supply, Single/Dual (±) | 15V ±15V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 115Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 80 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 5pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 600ns, 450ns |
| Charge Injection | 20pC |
| Channel-to-Channel Matching (ΔRon) | 5.75 Ω |
| Crosstalk | -80dB @ 100kHz |
| Switch-on Time-Max | 600ns |
| Length | 8.965mm |
| Width | 8.965mm |
| RoHS Status | Non-RoHS Compliant |
ADG211AKP Overview
Packed in 20-LCC (J-Lead), the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. Surface Mount is where this multiplexer is located. There is 1:1 ratio between the number of multiplexers and demultiplexers. Temperatures around -40°C~85°C TA are extended for operation. Total terminations are 20. A electrical component with 1 channels is capable of high-quality output. It is safe to turn on and run the electronic component with a 15V voltage supply. An electrical component of this type can be found in the 20 series. Based on SPST - NC switching circuits, these analog multiplexers work. There are 4 circuits in this multiplexer.
ADG211AKP Features
1 Channels
Switch Circuit: SPST - NC
ADG211AKP Applications
There are a lot of Rochester Electronics, LLC ADG211AKP Analog Switches & Multiplexers ICs applications.
- USB 1.1 signal switching circuits
- High reliability control systems
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- T1/E1 Terminals
- Multiplexers
- Precision test equipment
- Remote Powered Equipment
- Isolation
- Avionics
