Parameters |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e0 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
115Ohm |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
4 |
Supply Voltage |
15V |
Terminal Pitch |
1.27mm |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG211 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
15V |
Number of Channels |
4 |
Max Supply Voltage |
25V |
Power Dissipation |
470mW |
Throw Configuration |
SPST |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Max Dual Supply Voltage |
22V |
On-State Resistance (Max) |
115Ohm |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
80 dB |
Current - Leakage (IS(off)) (Max) |
5nA |
Channel Capacitance (CS(off), CD(off)) |
5pF 5pF |
Switch Circuit |
SPST - NC |
Switch Time (Ton, Toff) (Max) |
600ns, 450ns |
Charge Injection |
20pC |
Channel-to-Channel Matching (ΔRon) |
5.75 Ω |
Crosstalk |
-80dB @ 100kHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
600ns |
Normal Position |
NC |
Voltage - Supply, Dual (V±) |
±15V |
Height Seated (Max) |
1.75mm |
Length |
9.9mm |
Width |
3.9mm |
RoHS Status |
Non-RoHS Compliant |
ADG211AKR-REEL Overview
The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. High reliability is achieved by using advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Around -40°C~85°C TA is the extended operating temperature. The total number of terminations is 16. As a result of its 4 channels, this electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 15V voltage supply. There is an electrical component included in the 16 series. On the other hand, analog switches can be constructed using SPST - NC switching circuits. If you are looking for variants of the digital switch, trying search with ADG211. As far as internal resistance is concerned, it has 115Ohm. You can find the functions of the 16 pins in the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Users shouldn't supply more than 25V voltage to the switch device. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 22V. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. The electrical part can be operated at 15V voltage levels.
ADG211AKR-REEL Features
4 Channels
Switch Circuit: SPST - NC
ADG211AKR-REEL Applications
There are a lot of Analog Devices Inc. ADG211AKR-REEL Analog Switches & Multiplexers ICs applications.
- Relay replacements
- Optical Applications
- Multi-Line E1 Interface Cards
- Remote Powered Equipment
- Audio and video signal routing
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Imaging
- 65 V DACs
- Ultrasound
- ATM