ADG211AKR-REEL7
| Parameters | |
|---|---|
| Channel Capacitance (CS(off), CD(off)) | 5pF 5pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 600ns, 450ns |
| Charge Injection | 20pC |
| Channel-to-Channel Matching (ΔRon) | 5.75 Ω |
| Crosstalk | -80dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 600ns |
| Normal Position | NC |
| Voltage - Supply, Dual (V±) | ±15V |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 115Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG211 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 15V |
| Number of Channels | 4 |
| Max Supply Voltage | 25V |
| Power Dissipation | 470mW |
| Throw Configuration | SPST |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 115Ohm |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 80 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
ADG211AKR-REEL7 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). Advanced packaging method Tape & Reel (TR) is used to provide high reliability. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. Operating temperature extended to -40°C~85°C TA. Total terminations are 16. A high-quality output is provided by the electrical component's 4 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. A total of 16 pins are injected into the body of the electronic part. The analog switch ics are built using SPST - NC switching circuits. Try searching for the analog switch ic with ADG211 if you are looking for variants. This digital multiplexer has 115Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users should never supply a voltage higher than 25V to a switch device. For this switch, a dual supply voltage is feasible, but it must not exceed 22VIt is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. 15V operating voltages can be used with this electrical part.
ADG211AKR-REEL7 Features
4 Channels
Switch Circuit: SPST - NC
ADG211AKR-REEL7 Applications
There are a lot of Analog Devices Inc. ADG211AKR-REEL7 Analog Switches & Multiplexers ICs applications.
- HDTV
- High-Voltage
- Communications systems
- USB 1.1 signal switching circuits
- SONET/SDH ADM
- Access Concentrators
- High reliability control systems
- Industrial control systems
- Medical Instrumentation
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
