Parameters |
Max Supply Voltage |
25V |
Operating Supply Current |
600μA |
Power Dissipation |
22.5mW |
Max Supply Current |
1mA |
Throw Configuration |
SPST |
Turn On Delay Time |
600 ns |
Supply Type |
Dual |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
450 ns |
Max Dual Supply Voltage |
22V |
On-State Resistance (Max) |
115Ohm |
High Level Output Current |
30mA |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
80 dB |
Current - Leakage (IS(off)) (Max) |
5nA |
Channel Capacitance (CS(off), CD(off)) |
5pF 5pF |
Switch Circuit |
SPST - NC |
Switch Time (Ton, Toff) (Max) |
600ns, 450ns |
Charge Injection |
20pC |
Channel-to-Channel Matching (ΔRon) |
5.75 Ω |
Crosstalk |
-80dB @ 100kHz |
Switching |
BREAK-BEFORE-MAKE |
Normal Position |
NC |
Voltage - Supply, Dual (V±) |
±15V |
Height Seated (Max) |
1.75mm |
Length |
9.9mm |
Width |
3.9mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 4 months ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
115Ohm |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
470mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
15V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG211 |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5V |
Polarity |
Non-Inverting |
Number of Channels |
4 |
Interface |
Parallel |
ADG211AKRZ-REEL Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). High reliability is ensured by the advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Around -40°C~85°C TA is the extended operating temperature. In total, 16 terminations have occurred. This electronic part offers high-quality output due to its 4 channels. A 15V voltage supply should turn on and run the electronic component. It is part of the design of the 16 series that this electronic component is included. Based on SPST - NC switching circuits, these analog multiplexers work. Try searching for the analog switch ic with ADG211 if you are looking for variants. An switch multiplexer with 115Ohm internal resistance has a value of 115Ohm. For functions related to 16 pins, please refer to the datasheets. Multiplexer or Switches is a typical switch device. normally, users should not supply switches with voltages higher than 25V. Dual supply type digital switch with a low cost. The analogue multiplexer could operate on 600μA current. It may damage the digital multiplexer if the voltage is higher than 1mA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 22V. Operating voltages range from 5V.
ADG211AKRZ-REEL Features
4 Channels
Switch Circuit: SPST - NC
600μA Supply Current
ADG211AKRZ-REEL Applications
There are a lot of Analog Devices Inc. ADG211AKRZ-REEL Analog Switches & Multiplexers ICs applications.
- Frame Relay Equipment
- Video switching
- High-Voltage
- Private Branch Exchange (PBX)
- Intelligent PBX
- Microwave transmission systems
- Sample-and-hold systems
- Digital cross connects (DSX-1)
- Audio and video routing
- Cellular phones