ADG212AKN
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 115Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADG212 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 5+-15V |
| Number of Channels | 4 |
| Nominal Supply Current | 100μA |
| Power Dissipation | 470mW |
| Throw Configuration | SPST |
| Voltage - Supply, Single/Dual (±) | 15V ±15V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 115Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 80 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 5pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 600ns, 450ns |
| Charge Injection | 20pC |
| Channel-to-Channel Matching (ΔRon) | 5.75 Ω |
| Crosstalk | -80dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 600ns |
| Drain to Source Resistance | 115Ohm |
| Normal Position | NO |
| Length | 19.055mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
ADG212AKN Overview
Due to its 16-DIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. High reliability is provided by advanced packaging method Tube. There is an analog multiplexer mounted in position Through Hole. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Operating temperature extended to -40°C~85°C TA. In total, there are 16 terminations. High-quality output is provided by the electronic component's 4 channels. A 15V voltage supply should turn on and run the electronic component. An electrical component like this is included in the 16 series. A SPST - NO switching circuit is used to build these analog multiplexers. Use ADG212 to search for variants of the digital switches. It has an internal resistance of 115Ohm. You can find the functions of the 16 pins in the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. There are SEPARATE OUTPUT outputs on this analog switch ic. Drain to Source resistance for this electronic component is 115Ohm.
ADG212AKN Features
4 Channels
Switch Circuit: SPST - NO
Drain-to-Source resistance: 115Ohm
ADG212AKN Applications
There are a lot of Analog Devices Inc. ADG212AKN Analog Switches & Multiplexers ICs applications.
- HDTV
- Digital cross connects (DSX-1)
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- FTTH
- Data Acquisition Systems
- Voice over IP/DSL – Integrated Access Devices, Smart
- Precision data acquisition
- Video switching
- SONET
- Routers
